diff --git a/dot_config/cava/config b/dot_config/cava/config
new file mode 100644
index 0000000..46a74ad
--- /dev/null
+++ b/dot_config/cava/config
@@ -0,0 +1,163 @@
+## Configuration file for CAVA. Default values are commented out. Use either ';' or '#' for commenting.
+
+
+[general]
+
+# Smoothing mode. Can be 'normal', 'scientific' or 'waves'.
+mode = normal
+
+# Accepts only non-negative values.
+framerate = 60
+
+# 'autosens' will attempt to decrease sensitivity if the bars peak. 1 = on, 0 = off
+# 'overshoot' allows bars to overshoot (in % of terminal height) without initiating autosens.
+; autosens = 1
+; overshoot = 20
+
+# Manual sensitivity in %. Autosens must be turned off for this to take effect.
+# 200 means double height. Accepts only non-negative values.
+; sensitivity = 100
+
+# The number of bars (0-200). 0 sets it to auto (fill up console).
+# Bars' width and space between bars in number of characters.
+bars = 0
+bar_width = 4
+bar_spacing = 1
+
+# Lower and higher cutoff frequencies for lowest and highest bars
+# the bandwidth of the visualizer.
+# Note: there is a minimum total bandwidth of 43Mhz x number of bars.
+# Cava will automatically increase the higher cutoff if a too low band is specified.
+; lower_cutoff_freq = 50
+; higher_cutoff_freq = 10000
+
+
+
+[input]
+
+# Audio capturing method. Possible methods are: 'pulse', 'alsa' or 'fifo'.
+# Defaults to 'pulse', 'alsa' or 'fifo', in that order, dependent on what support cava was built with.
+#
+# All input methods uses the same config variable 'source'
+# to define where it should get the audio.
+#
+# For pulseaudio 'source' will be the source. Default: 'auto', which uses the monitor source of the default sink
+# (all pulseaudio sinks(outputs) have 'monitor' sources(inputs) associated with them).
+#
+# For alsa 'source' will be the capture device.
+# For fifo 'source' will be the path to fifo-file.
+method = pulse
+source = auto
+
+; method = alsa
+; source = hw:Loopback,1
+
+; method = fifo
+; source = /tmp/mpd.fifo
+
+
+
+[output]
+
+# Ouput method. Can be 'ncurses', 'noncurses' or 'raw'.
+# 'noncurses' is for systems that does not suport ncurses.
+# 'raw' is a 16 bit data stream of the bar heights that can be used to send to other applications.
+# 'raw' defaults to 200 bars, which can be adjusted in the 'bars' option above.
+method = ncurses
+
+# Visual styles. Can be 'stereo' or 'mono'.
+# 'stereo' mirrors both channels with low frequencies in center.
+# 'mono' averages both channels and outputs left to right lowest to highest frequencies.
+style = mono
+
+# Raw output target. A fifo will be created if target does not exist.
+; raw_target = /dev/stdout
+
+# Raw data format. Can be 'binary' or 'ascii'.
+; data_format = binary
+
+# Binary bit format, can be '8bit' (0-255) or '16bit' (0-65530).
+; bit_format = 16bit
+
+# Ascii max value. In 'ascii' mode range will run from 0 to value specified here
+; ascii_max_range = 1000
+
+# Ascii delimiters. In ascii format each bar and frame is separated by a delimiters.
+# Use decimal value in ascii table (i.e. 59 = ';' and 10 = '\n' (line feed)).
+; bar_delimiter = 59
+; frame_delimiter = 10
+
+
+
+# [color]
+
+# # Colors can be one of seven predefined: black, blue, cyan, green, magenta, red, white, yellow.
+# # Or defined by hex code '#xxxxxx' (hex code must be within ''). User defined colors requires a
+# # terminal that can change color definitions such as Gnome-terminal or rxvt.
+# ; background = black
+# ; foreground = cyan
+
+# # Gradient mode, only hex defined colors are supported, background must also be defined in hex
+# # or remain commented out. 1 = on, 0 = off. Warning: for certain terminal emulators cava will
+# # not able to restore color definitions on exit, simply restart your terminal to restore colors.
+# gradient = 1
+# gradient_color_1 = '#0099ff'
+# gradient_color_2 = '#ff3399'
+
+
+
+[smoothing]
+
+# Multiplier for the integral smoothing calculations. Takes values from 0-0.99.
+# Higher values means smoother, but less precise. Set to 0 to disable.
+; integral = 0.7
+
+# Disables or enables the so-called "Monstercat smoothing". Set to 0 to disable.
+; monstercat = 1
+; waves = 1
+
+# Set gravity multiplier for "drop off". Higher values means bars will drop faster.
+# Accepts only non-negative values. 0.5 means half gravity, 2 means double. Set to 0 to disable "drop off".
+; gravity = 1
+
+
+# In bar height, bars that would have been lower that this will not be drawn.
+; ignore = 0
+
+
+[eq]
+
+# This one is tricky. You can have as much keys as you want.
+# Remember to uncomment more then one key! More keys = more precision.
+# Look at readme.md on github for further explanations and examples.
+; 1 = 1 # bass
+; 2 = 1
+; 3 = 1 # midtone
+; 4 = 1
+; 5 = 1 # treble
+
+
+[color]
+
+background = '#191724'
+gradient = 1
+gradient_count = 6
+gradient_color_1 = '#31748f'
+gradient_color_2 = '#9ccfd8'
+gradient_color_3 = '#c4a7e7'
+gradient_color_4 = '#ebbcba'
+gradient_color_5 = '#f6c177'
+gradient_color_6 = '#eb6f92'
+
+[color]
+
+gradient = 1
+
+gradient_color_1 = '#94e2d5'
+gradient_color_2 = '#89dceb'
+gradient_color_3 = '#74c7ec'
+gradient_color_4 = '#89b4fa'
+gradient_color_5 = '#cba6f7'
+gradient_color_6 = '#f5c2e7'
+gradient_color_7 = '#eba0ac'
+gradient_color_8 = '#f38ba8'
diff --git a/dot_config/dunst/dunstrc b/dot_config/dunst/dunstrc
new file mode 100644
index 0000000..df9a2af
--- /dev/null
+++ b/dot_config/dunst/dunstrc
@@ -0,0 +1,466 @@
+# See dunst(5) for all configuration options
+
+[global]
+ ### Display ###
+
+ # Which monitor should the notifications be displayed on.
+ monitor = 0
+
+ # Display notification on focused monitor. Possible modes are:
+ # mouse: follow mouse pointer
+ # keyboard: follow window with keyboard focus
+ # none: don't follow anything
+ #
+ # "keyboard" needs a window manager that exports the
+ # _NET_ACTIVE_WINDOW property.
+ # This should be the case for almost all modern window managers.
+ #
+ # If this option is set to mouse or keyboard, the monitor option
+ # will be ignored.
+ follow = none
+
+ ### Geometry ###
+
+ # dynamic width from 0 to 300
+ # width = (0, 300)
+ # constant width of 300
+ width = 600
+
+ # The maximum height of a single notification, excluding the frame.
+ height = 200
+
+ # Position the notification in the top right corner
+ origin = top-left
+
+ # Offset from the origin
+ offset = 20x20
+
+ # Scale factor. It is auto-detected if value is 0.
+ scale = 0
+
+ # Maximum number of notification (0 means no limit)
+ notification_limit = 0
+
+ ### Progress bar ###
+
+ # Turn on the progess bar. It appears when a progress hint is passed with
+ # for example dunstify -h int:value:12
+ progress_bar = true
+
+ # Set the progress bar height. This includes the frame, so make sure
+ # it's at least twice as big as the frame width.
+ progress_bar_height = 10
+
+ # Set the frame width of the progress bar
+ progress_bar_frame_width = 1
+
+ # Set the minimum width for the progress bar
+ progress_bar_min_width = 150
+
+ # Set the maximum width for the progress bar
+ progress_bar_max_width = 300
+
+
+ # Show how many messages are currently hidden (because of
+ # notification_limit).
+ indicate_hidden = yes
+
+ # The transparency of the window. Range: [0; 100].
+ # This option will only work if a compositing window manager is
+ # present (e.g. xcompmgr, compiz, etc.). (X11 only)
+ transparency = 0
+
+ # Draw a line of "separator_height" pixel height between two
+ # notifications.
+ # Set to 0 to disable.
+ # If gap_size is greater than 0, this setting will be ignored.
+ separator_height = 2
+
+ # Padding between text and separator.
+ padding = 8
+
+ # Horizontal padding.
+ horizontal_padding = 8
+
+ # Padding between text and icon.
+ text_icon_padding = 0
+
+ # Defines width in pixels of frame around the notification window.
+ # Set to 0 to disable.
+ frame_width = 3
+
+ # Defines color of the frame around the notification window.
+ frame_color = "#c0caf5"
+
+ # Size of gap to display between notifications - requires a compositor.
+ # If value is greater than 0, separator_height will be ignored and a border
+ # of size frame_width will be drawn around each notification instead.
+ # Click events on gaps do not currently propagate to applications below.
+ gap_size = 5
+
+ # Define a color for the separator.
+ # possible values are:
+ # * auto: dunst tries to find a color fitting to the background;
+ # * foreground: use the same color as the foreground;
+ # * frame: use the same color as the frame;
+ # * anything else will be interpreted as a X color.
+ separator_color = frame
+
+ # Sort messages by urgency.
+ sort = yes
+
+ # Don't remove messages, if the user is idle (no mouse or keyboard input)
+ # for longer than idle_threshold seconds.
+ # Set to 0 to disable.
+ # A client can set the 'transient' hint to bypass this. See the rules
+ # section for how to disable this if necessary
+ # idle_threshold = 120
+
+ ### Text ###
+
+ font = Sofia Pro 16
+
+ # The spacing between lines. If the height is smaller than the
+ # font height, it will get raised to the font height.
+ line_height = 0
+
+ # Possible values are:
+ # full: Allow a small subset of html markup in notifications:
+ # bold
+ # italic
+ # strikethrough
+ # underline
+ #
+ # For a complete reference see
+ # .
+ #
+ # strip: This setting is provided for compatibility with some broken
+ # clients that send markup even though it's not enabled on the
+ # server. Dunst will try to strip the markup but the parsing is
+ # simplistic so using this option outside of matching rules for
+ # specific applications *IS GREATLY DISCOURAGED*.
+ #
+ # no: Disable markup parsing, incoming notifications will be treated as
+ # plain text. Dunst will not advertise that it has the body-markup
+ # capability if this is set as a global setting.
+ #
+ # It's important to note that markup inside the format option will be parsed
+ # regardless of what this is set to.
+ markup = full
+
+ # The format of the message. Possible variables are:
+ # %a appname
+ # %s summary
+ # %b body
+ # %i iconname (including its path)
+ # %I iconname (without its path)
+ # %p progress value if set ([ 0%] to [100%]) or nothing
+ # %n progress value if set without any extra characters
+ # %% Literal %
+ # Markup is allowed
+ format = "%s\n%b"
+
+ # Alignment of message text.
+ # Possible values are "left", "center" and "right".
+ alignment = left
+
+ # Vertical alignment of message text and icon.
+ # Possible values are "top", "center" and "bottom".
+ vertical_alignment = center
+
+ # Show age of message if message is older than show_age_threshold
+ # seconds.
+ # Set to -1 to disable.
+ show_age_threshold = 60
+
+ # Specify where to make an ellipsis in long lines.
+ # Possible values are "start", "middle" and "end".
+ ellipsize = "end"
+
+ # Ignore newlines '\n' in notifications.
+ ignore_newline = no
+
+ # Stack together notifications with the same content
+ stack_duplicates = true
+
+ # Hide the count of stacked notifications with the same content
+ hide_duplicate_count = false
+
+ # Display indicators for URLs (U) and actions (A).
+ show_indicators = yes
+
+ ### Icons ###
+
+ # Align icons left/right/top/off
+ icon_position = left
+ # Scale small icons up to this size, set to 0 to disable. Helpful
+ # for e.g. small files or high-dpi screens. In case of conflict,
+ # max_icon_size takes precedence over this.
+ min_icon_size = 32
+
+ # Scale larger icons down to this size, set to 0 to disable
+ max_icon_size = 64
+
+ # Paths to default icons.
+ icon_path = /usr/share/icons/gnome/128x128/status/:/usr/share/icons/gnome/128x128/devices/
+ icon_theme = "Papirus, Adwaita"
+ enable_recursive_icon_lookup = true
+
+ always_run_scripts = true
+ ### History ###
+
+ # Should a notification popped up from history be sticky or timeout
+ # as if it would normally do.
+ sticky_history = yes
+
+ # Maximum amount of notifications kept in history
+ history_length = 20
+
+ ### Misc/Advanced ###
+
+ # dmenu path.
+ dmenu = /usr/bin/dmenu -p dunst:
+
+ # Browser for opening urls in context menu.
+ browser = /usr/bin/xdg-open
+
+ # Always run rule-defined scripts, even if the notification is suppressed
+ always_run_script = true
+
+ # Define the title of the windows spawned by dunst
+ title = Dunst
+
+ # Define the class of the windows spawned by dunst
+ class = Dunst
+
+ # Define the corner radius of the notification window
+ # in pixel size. If the radius is 0, you have no rounded
+ # corners.
+ # The radius will be automatically lowered if it exceeds half of the
+ # notification height to avoid clipping text and/or icons.
+ corner_radius = 15
+
+ # Ignore the dbus closeNotification message.
+ # Useful to enforce the timeout set by dunst configuration. Without this
+ # parameter, an application may close the notification sent before the
+ # user defined timeout.
+ ignore_dbusclose = false
+
+ ### Wayland ###
+ # These settings are Wayland-specific. They have no effect when using X11
+
+ # Uncomment this if you want to let notications appear under fullscreen
+ # applications (default: overlay)
+ layer = bottom
+
+ # Set this to true to use X11 output on Wayland.
+ force_xwayland = false
+
+ ### Legacy
+
+ # Use the Xinerama extension instead of RandR for multi-monitor support.
+ # This setting is provided for compatibility with older nVidia drivers that
+ # do not support RandR and using it on systems that support RandR is highly
+ # discouraged.
+ #
+ # By enabling this setting dunst will not be able to detect when a monitor
+ # is connected or disconnected which might break follow mode if the screen
+ # layout changes.
+ force_xinerama = false
+
+ ### mouse
+
+ # Defines list of actions for each mouse event
+ # Possible values are:
+ # * none: Don't do anything.
+ # * do_action: Invoke the action determined by the action_name rule. If there is no
+ # such action, open the context menu.
+ # * open_url: If the notification has exactly one url, open it. If there are multiple
+ # ones, open the context menu.
+ # * close_current: Close current notification.
+ # * close_all: Close all notifications.
+ # * context: Open context menu for the notification.
+ # * context_all: Open context menu for all notifications.
+ # These values can be strung together for each mouse event, and
+ # will be executed in sequence.
+ mouse_left_click = close_current
+ mouse_middle_click = context
+ mouse_right_click = do_action
+
+# Experimental features that may or may not work correctly. Do not expect them
+# to have a consistent behaviour across releases.
+[experimental]
+ # Calculate the dpi to use on a per-monitor basis.
+ # If this setting is enabled the Xft.dpi value will be ignored and instead
+ # dunst will attempt to calculate an appropriate dpi value for each monitor
+ # using the resolution and physical size. This might be useful in setups
+ # where there are multiple screens with very different dpi values.
+ per_monitor_dpi = false
+
+
+[urgency_low]
+ # IMPORTANT: colors have to be defined in quotation marks.
+ # Otherwise the "#" and following would be interpreted as a comment.
+ background = "#fff"
+ foreground = "#89b4fa"
+ frame_color = "#89b4fa"
+ timeout = 3
+ script = ~/.scripts/dunst/sound-normal.sh
+ # Icon for notifications with low urgency, uncomment to enable
+ #default_icon = /path/to/icon
+
+[urgency_normal]
+ background = "#fff"
+ foreground = "#a6e3a1"
+ frame_color = "#a6e3a1"
+ timeout = 3
+ script = ~/.scripts/dunst/sound-normal.sh
+ # Icon for notifications with normal urgency, uncomment to enable
+ #default_icon = /path/to/icon
+
+[urgency_critical]
+ background = "#fff"
+ foreground = "#f38ba8"
+ frame_color = "#f38ba8"
+ timeout = 3
+ script = ~/.scripts/dunst/sound-critical.sh
+ # Icon for notifications with critical urgency, uncomment to enable
+ #default_icon = /path/to/icon
+
+# Every section that isn't one of the above is interpreted as a rules to
+# override settings for certain messages.
+#
+# Messages can be matched by
+# appname (discouraged, see desktop_entry)
+# body
+# category
+# desktop_entry
+# icon
+# match_transient
+# msg_urgency
+# stack_tag
+# summary
+#
+# and you can override the
+# background
+# foreground
+# format
+# frame_color
+# fullscreen
+# new_icon
+# set_stack_tag
+# set_transient
+# set_category
+# timeout
+# urgency
+# icon_position
+# skip_display
+# history_ignore
+# action_name
+# word_wrap
+# ellipsize
+# alignment
+# hide_text
+#
+# Shell-like globbing will get expanded.
+#
+# Instead of the appname filter, it's recommended to use the desktop_entry filter.
+# GLib based applications export their desktop-entry name. In comparison to the appname,
+# the desktop-entry won't get localized.
+#
+# SCRIPTING
+# You can specify a script that gets run when the rule matches by
+# setting the "script" option.
+# The script will be called as follows:
+# script appname summary body icon urgency
+# where urgency can be "LOW", "NORMAL" or "CRITICAL".
+#
+# NOTE: It might be helpful to run dunst -print in a terminal in order
+# to find fitting options for rules.
+
+# Disable the transient hint so that idle_threshold cannot be bypassed from the
+# client
+#[transient_disable]
+# match_transient = yes
+# set_transient = no
+#
+# Make the handling of transient notifications more strict by making them not
+# be placed in history.
+#[transient_history_ignore]
+# match_transient = yes
+# history_ignore = yes
+
+# fullscreen values
+# show: show the notifications, regardless if there is a fullscreen window opened
+# delay: displays the new notification, if there is no fullscreen window active
+# If the notification is already drawn, it won't get undrawn.
+# pushback: same as delay, but when switching into fullscreen, the notification will get
+# withdrawn from screen again and will get delayed like a new notification
+#[fullscreen_delay_everything]
+# fullscreen = delay
+#[fullscreen_show_critical]
+# msg_urgency = critical
+# fullscreen = show
+
+#[espeak]
+# summary = "*"
+# script = dunst_espeak.sh
+
+#[script-test]
+# summary = "*script*"
+# script = dunst_test.sh
+
+#[ignore]
+# # This notification will not be displayed
+# summary = "foobar"
+# skip_display = true
+
+#[history-ignore]
+# # This notification will not be saved in history
+# summary = "foobar"
+# history_ignore = yes
+
+#[skip-display]
+# # This notification will not be displayed, but will be included in the history
+# summary = "foobar"
+# skip_display = yes
+
+#[signed_on]
+# appname = Pidgin
+# summary = "*signed on*"
+# urgency = low
+#
+#[signed_off]
+# appname = Pidgin
+# summary = *signed off*
+# urgency = low
+#
+#[says]
+# appname = Pidgin
+# summary = *says*
+# urgency = critical
+#
+#[twitter]
+# appname = Pidgin
+# summary = *twitter.com*
+# urgency = normal
+#
+#[stack-volumes]
+# appname = "some_volume_notifiers"
+# set_stack_tag = "volume"
+#
+[redirect]
+summary = "*"
+script = "~/.config/hypr/scripts/tools/notif"
+
+[logger]
+summary = "*"
+script = "~/.config/hypr/scripts/tools/notif"
+
+[spotify]
+summary = "*"
+script = "~/.scripts/music-art"
+
+[spotify-icon]
+appname = "Spotify"
+icon = "~/.cache/temp.png"
diff --git a/dot_config/hypr/component/waybar/config b/dot_config/hypr/component/waybar/config
new file mode 100644
index 0000000..18f8c27
--- /dev/null
+++ b/dot_config/hypr/component/waybar/config
@@ -0,0 +1,193 @@
+{
+ "layer": "bottom", // Waybar at top layer
+ "position": "top", // Waybar position (top|bottom|left|right)
+ "height": 50, // Waybar height (to be removed for auto height)
+ // "width": 1280, // Waybar width
+ "spacing": 5, // Gaps between modules (4px)
+ // Choose the order of the modules
+ // "margin-left":25,
+ // "margin-right":25,
+ "margin-bottom":-11,
+ //"margin-top":5,
+ "modules-left": ["wlr/workspaces"],
+ "modules-right": ["tray","temperature","network","battery","custom/ss","custom/cycle_wall","custom/expand","cpu","clock"],
+ "modules-center": ["custom/dynamic_pill"],
+ // Modules configuration
+
+
+ // custom modules ////////////////
+ "custom/dynamic_pill": {
+ "return-type": "json",
+ // "format":"{}",
+ "exec": "~/.config/hypr/scripts/tools/start_dyn",
+ "escape":true
+ },
+ "custom/ss":{
+ "format":"{}",
+ "exec":"~/.config/hypr/scripts/tools/expand ss-icon",
+ "on-click": "~/.config/hypr/scripts/screenshot"
+ },
+ "custom/cycle_wall":{
+ "format":"{}",
+ "exec": "~/.config/hypr/scripts/tools/expand wall",
+ // "interval": 1,
+ "on-click": "~/.config/hypr/scripts/tools/expand cycle"
+ },
+ "custom/expand":{
+ "on-click":"~/.config/hypr/scripts/expand_toolbar",
+ "format":"{}",
+ "exec":"~/.config/hypr/scripts/tools/expand arrow-icon"
+ },
+ // "custom/waybar-mpris": {
+ // "return-type": "json",
+ // "exec": "echo ' '",
+ // "on-click": "waybar-mpris --send toggle",
+ // // This option will switch between players on right click.
+ // "on-click-right": "waybar-mpris --send player-next",
+ // // The options below will switch the selected player on scroll
+ // // "on-scroll-up": "waybar-mpris --send player-next",
+ // // "on-scroll-down": "waybar-mpris --send player-prev",
+ // // The options below will go to next/previous track on scroll
+ // // "on-scroll-up": "waybar-mpris --send next",
+ // // "on-scroll-down": "waybar-mpris --send prev",
+ // "escape": true
+ // },
+ //////////////////////////////////
+ "keyboard-state": {
+ "numlock": true,
+ "capslock": true,
+ "format": "{name} {icon}",
+ "format-icons": {
+ "locked": "",
+ "unlocked": ""
+ }
+ },
+ "wlr/workspaces": {
+ "format": "{icon}",
+ "format-active": " {icon} ",
+ "on-click": "activate"
+ // "format-icons":{
+ // "10":"10"
+ // }
+ },
+ "sway/mode": {
+ "format": "{}"
+ },
+ "mpd": {
+ "format": "{stateIcon} {consumeIcon}{randomIcon}{repeatIcon}{singleIcon}{artist} - {album} - {title} ({elapsedTime:%M:%S}/{totalTime:%M:%S}) ⸨{songPosition}|{queueLength}⸩ {volume}% ",
+ "format-disconnected": "Disconnected ",
+ "format-stopped": "{consumeIcon}{randomIcon}{repeatIcon}{singleIcon}Stopped ",
+ "unknown-tag": "N/A",
+ "interval": 2,
+ "consume-icons": {
+ "on": " "
+ },
+ "random-icons": {
+ "off": " ",
+ "on": " "
+ },
+ "repeat-icons": {
+ "on": " "
+ },
+ "single-icons": {
+ "on": "1 "
+ },
+ "state-icons": {
+ "paused": "",
+ "playing": ""
+ },
+ "tooltip-format": "MPD (connected)",
+ "tooltip-format-disconnected": "MPD (disconnected)"
+ },
+ "idle_inhibitor": {
+ "format": "{icon}",
+ "format-icons": {
+ "activated": "",
+ "deactivated": ""
+ }
+ },
+ "tray": {
+ // "icon-size": 21,
+ "spacing": 10
+ },
+ "clock": {
+ // "timezone": "America/New_York",
+ "tooltip-format": "{:%Y %B}\n{calendar}",
+ "interval": 60,
+ "format": "{:%I:%M}",
+ "max-length": 25
+ },
+ "cpu": {
+ "interval":1,
+ "format": "{icon0} {icon1} {icon2} {icon3}",
+ "format-icons": ["▁", "▂", "▃", "▄", "▅", "▆", "▇", "█"]
+ },
+ "memory": {
+ "format": "{}% "
+ },
+ "temperature": {
+ // "thermal-zone": 2,
+ // "hwmon-path": "/sys/class/hwmon/hwmon2/temp1_input",
+ "critical-threshold": 80,
+ "format-critical": "{temperatureC}°C",
+ "format": ""
+ },
+ "backlight": {
+ // "device": "acpi_video1",
+ "format": "{percent}% {icon}",
+ "format-icons": ["", "", "", "", "", "", "", "", ""]
+ },
+ "battery": {
+ "states": {
+ "warning": 50,
+ "critical": 20
+ },
+ "format": "{icon}",
+ "format-charging": "",
+ "format-plugged": "",
+ // "format-good": "", // An empty format will hide the module
+ // "format-full": "",
+ "format-icons": ["", "", "", "", ""]
+ },
+ "battery#bat2": {
+ "bat": "BAT2"
+ },
+ "network": {
+ // "interface": "wlp2*", // (Optional) To force the use of this interface
+ "format-wifi": "",
+ "format-ethernet": "",
+ "tooltip-format": "via {gwaddr} {ifname}",
+ "format-linked": "",
+ "format-disconnected": "wifi",
+ "format-alt": " "
+ },
+ "pulseaudio": {
+ // "scroll-step": 1, // %, can be a float
+ "format": "{format_source}",
+ "format-bluetooth": "{volume}% {icon} {format_source}",
+ "format-bluetooth-muted": " {icon} {format_source}",
+ "format-muted": " {format_source}",
+ "format-icons": {
+ "headphone": "",
+ "hands-free": "",
+ "headset": "",
+ "phone": "",
+ "portable": "",
+ "car": "",
+ "default": ["", "", ""]
+ },
+ "on-click": "pavucontrol"
+ },
+ "custom/media": {
+ "format": "{icon} {}",
+ "return-type": "json",
+ "max-length": 40,
+ "format-icons": {
+ "spotify": "",
+ "default": "🎜"
+ },
+ "escape": true,
+ "exec": "$HOME/.config/waybar/mediaplayer.py 2> /dev/null" // Script in resources folder
+ // "exec": "$HOME/.config/waybar/mediaplayer.py --player spotify 2> /dev/null" // Filter player based on name
+ }
+}
diff --git a/dot_config/hypr/component/waybar/style.css b/dot_config/hypr/component/waybar/style.css
new file mode 100644
index 0000000..54ca4a0
--- /dev/null
+++ b/dot_config/hypr/component/waybar/style.css
@@ -0,0 +1,340 @@
+* {
+ font-family: CartographCF Nerd Font,FontAwesome, Roboto, Helvetica, Arial, sans-serif;
+ font-size: 13px;
+}
+
+window#waybar {
+ background-color: transparent;
+}
+
+#workspaces{
+ background-color: transparent;
+ margin-top: 10px;
+ margin-bottom: 10px;
+ margin-right: 10px;
+ margin-left: 25px;
+}
+#workspaces button{
+ box-shadow: rgba(0, 0, 0, 0.116) 2 2 5 2px;
+ background-color: #fff ;
+ border-radius: 15px;
+ margin-right: 10px;
+ padding-top: 4px;
+ padding-bottom: 2px;
+ padding-right: 10px;
+ font-weight: bolder;
+ color: #cba6f7 ;
+}
+
+#workspaces button.active{
+ padding-right: 20px;
+ box-shadow: rgba(0, 0, 0, 0.288) 2 2 5 2px;
+ text-shadow: 0 0 5px rgba(0, 0, 0, 0.377);
+ padding-left: 20px;
+ padding-bottom: 3px;
+ background: rgb(202,158,230);
+ background: linear-gradient(45deg, rgba(202,158,230,1) 0%, rgba(245,194,231,1) 43%, rgba(180,190,254,1) 80%, rgba(137,180,250,1) 100%);
+ background-size: 300% 300%;
+ animation: gradient 10s ease infinite;
+ color: #fff;
+}
+
+@keyframes gradient {
+ 0% {
+ background-position: 0% 50%;
+ }
+ 50% {
+ background-position: 100% 50%;
+ }
+ 100% {
+ background-position: 0% 50%;
+ }
+}
+
+
+#clock,
+#battery,
+#cpu,
+#memory,
+#disk,
+#temperature,
+#backlight,
+#network,
+#pulseaudio,
+#custom-media,
+#tray,
+#mode,
+#idle_inhibitor,
+#custom-expand,
+#custom-cycle_wall,
+#custom-ss,
+#custom-dynamic_pill,
+#mpd {
+ padding: 0 10px;
+ border-radius: 15px;
+ background-color: #cdd6f4;
+ color: #516079;
+ box-shadow: rgba(0, 0, 0, 0.116) 2 2 5 2px;
+ margin-top: 10px;
+ margin-bottom: 10px;
+ margin-right: 10px;
+}
+
+#custom-dynamic_pill.low{
+ background: rgb(148,226,213);
+ background: linear-gradient(52deg, rgba(148,226,213,1) 0%, rgba(137,220,235,1) 19%, rgba(116,199,236,1) 43%, rgba(137,180,250,1) 56%, rgba(180,190,254,1) 80%, rgba(186,187,241,1) 100%);
+ background-size: 300% 300%;
+ text-shadow: 0 0 5px rgba(0, 0, 0, 0.377);
+ animation: gradient 15s ease infinite;
+ font-weight: bolder;
+ color: #fff;
+}
+#custom-dynamic_pill.normal{
+ background: rgb(166,209,137);
+ background: linear-gradient(52deg, rgba(166,209,137,1) 0%, rgba(166,227,161,1) 26%, rgba(148,226,213,1) 65%, rgba(129,200,190,1) 100%);
+ background-size: 300% 300%;
+ animation: gradient 15s ease infinite;
+ text-shadow: 0 0 5px rgba(0, 0, 0, 0.377);
+ font-weight: bolder;
+ color: #fff;
+}
+#custom-dynamic_pill.critical{
+ background: rgb(235,160,172);
+ background: linear-gradient(52deg, rgba(235,160,172,1) 0%, rgba(243,139,168,1) 30%, rgba(231,130,132,1) 48%, rgba(250,179,135,1) 77%, rgba(249,226,175,1) 100%);
+ background-size: 300% 300%;
+ animation: gradient 15s ease infinite;
+ text-shadow: 0 0 5px rgba(0, 0, 0, 0.377);
+ font-weight: bolder;
+ color: #fff;
+}
+
+
+#custom-dynamic_pill.playing{
+ background: rgb(249,226,175);
+ background: linear-gradient(45deg, rgba(249,226,175,1) 0%, rgba(245,194,231,1) 20%, rgba(180,190,254,1) 100%);
+ background-size: 300% 300%;
+ animation: gradient 15s ease infinite;
+ text-shadow: 0 0 5px rgba(0, 0, 0, 0.377);
+ font-weight: 900;
+ color: #fff ;
+}
+#custom-dynamic_pill.paused{
+ background: #fff ;
+ font-weight: bolder;
+ color: #b4befe;
+}
+
+#custom-ss{
+ background: #fff;
+ color: rgba(203,166,247,1);
+ font-weight: bolder;
+ padding: 5px;
+ padding-left: 20px;
+ padding-right: 20px;
+ border-radius: 15px;
+}
+
+#custom-cycle_wall{
+ background: rgb(245,194,231);
+ background: linear-gradient(45deg, rgba(245,194,231,1) 0%, rgba(203,166,247,1) 0%, rgba(243,139,168,1) 13%, rgba(235,160,172,1) 26%, rgba(250,179,135,1) 34%, rgba(249,226,175,1) 49%, rgba(166,227,161,1) 65%, rgba(148,226,213,1) 77%, rgba(137,220,235,1) 82%, rgba(116,199,236,1) 88%, rgba(137,180,250,1) 95%);
+ color: #fff;
+ background-size: 500% 500%;
+ animation: gradient 7s linear infinite;
+ font-weight: bolder;
+ padding: 5px;
+ border-radius: 15px;
+}
+
+
+#clock {
+ background: rgb(245,194,231);
+ background: linear-gradient(45deg, rgba(245,194,231,1) 0%, rgba(203,166,247,1) 64%, rgba(202,158,230,1) 100%);
+ margin-right: 25px;
+ color: #fff ;
+ background-size: 300% 300%;
+ text-shadow: 0 0 5px rgba(0, 0, 0, 0.377);
+ animation: gradient 20s ease infinite;
+ font-size: 15px;
+ padding-top: 5px;
+ padding-right: 21px;
+ font-weight: bolder;
+ padding-left: 20px
+}
+
+#battery.charging, #battery.plugged {
+ background-color: #94e2d5 ;
+}
+
+#battery {
+ background-color: #fff;
+ color:#a6e3a1;
+ font-weight: bolder;
+ font-size: 20px;
+ padding-left: 15px;
+ padding-right: 15px;
+}
+
+@keyframes blink {
+ to {
+ background-color: #f9e2af;
+ color:#96804e;
+ }
+}
+
+#battery.critical:not(.charging) {
+ background-color: #f38ba8;
+ color:#bf5673;
+ animation-name: blink;
+ animation-duration: 0.5s;
+ animation-timing-function: linear;
+ animation-iteration-count: infinite;
+ animation-direction: alternate;
+}
+
+label:focus {
+
+}
+
+#cpu {
+ background: rgb(180,190,254);
+ background: linear-gradient(52deg, rgba(180,190,254,1) 0%, rgba(137,220,235,1) 32%, rgba(137,180,250,1) 72%, rgba(166,227,161,1) 100%);
+ background-size: 300% 300%;
+ animation: gradient 20s ease infinite;
+ text-shadow: 0 0 5px rgba(0, 0, 0, 0.377);
+ /* background-color: #b4befe; */
+ color: #fff;
+}
+
+#memory {
+ background-color: #cba6f7;
+ color: #9a75c7;
+ font-weight: bolder;
+}
+
+#disk {
+ color: #964B00;
+}
+
+#backlight {
+ color: #90b1b1;
+}
+
+#network{
+ color:#000;
+}
+
+#network.disabled{
+ background-color: #45475a;
+}
+
+#network.disconnected{
+ background: rgb(243,139,168);
+ background: linear-gradient(45deg, rgba(243,139,168,1) 0%, rgba(250,179,135,1) 100%);
+ color: #fff;
+ font-weight: bolder;
+ padding-top: 3px;
+ padding-right: 11px;
+}
+
+#network.linked, #network.wifi{
+ background-color: #a6e3a1 ;
+}
+
+#network.ethernet{
+ background-color:#f9e2af ;
+}
+
+#pulseaudio {
+ background-color: #fab387;
+ color: #bf7d54;
+ font-weight: bolder;
+}
+
+#pulseaudio.muted {
+ background-color: #90b1b1;
+}
+
+#custom-media {
+ color: #66cc99;
+}
+
+#custom-media.custom-spotify {
+ background-color: #66cc99;
+}
+
+#custom-media.custom-vlc {
+ background-color: #ffa000;
+}
+
+#temperature {
+ background-color: #f9e2af;
+ color:#96804e;
+}
+
+#temperature.critical {
+ background-color: #f38ba8 ;
+ color:#bf5673;
+}
+
+#tray {
+ background-color: #2980b9;
+}
+
+#tray > .passive {
+ -gtk-icon-effect: dim;
+}
+
+#tray > .needs-attention {
+ -gtk-icon-effect: highlight;
+ background-color: #eb4d4b;
+}
+
+#idle_inhibitor {
+ background-color: #2d3436;
+}
+
+#idle_inhibitor.activated {
+ background-color: #ecf0f1;
+ color: #2d3436;
+}
+
+#mpd {
+ background-color: #66cc99;
+ color: #2a5c45;
+}
+
+#mpd.disconnected {
+ background-color: #f53c3c;
+}
+
+#mpd.stopped {
+ background-color: #90b1b1;
+}
+
+#mpd.paused {
+ background-color: #51a37a;
+}
+
+#language {
+ background: #00b093;
+ color: #740864;
+ padding: 0 5px;
+ margin: 0 5px;
+ min-width: 16px;
+}
+
+#keyboard-state {
+ background: #97e1ad;
+ color: #000000;
+ padding: 0 0px;
+ margin: 0 5px;
+ min-width: 16px;
+}
+
+#keyboard-state > label {
+ padding: 0 5px;
+}
+
+#keyboard-state > label.locked {
+ background: rgba(0, 0, 0, 0.2);
+}
diff --git a/dot_config/hypr/executable_autostart b/dot_config/hypr/executable_autostart
new file mode 100644
index 0000000..0caffe1
--- /dev/null
+++ b/dot_config/hypr/executable_autostart
@@ -0,0 +1,21 @@
+#!/usr/bin/bash
+
+# variables
+config=$HOME/.config/hypr
+scripts=$config/scripts
+
+# notification daemon
+dunst &
+
+# waybar
+$scripts/launch_waybar &
+$scripts/tools/dynamic &
+
+# wallpaper
+$scripts/wall $config/wallpapers/cloud.png &
+
+# effects
+$scripts/rgb &
+
+# other
+dbus-update-activation-environment --systemd WAYLAND_DISPLAY XDG_CURRENT_DESKTOP &
diff --git a/dot_config/hypr/executable_hyprland.conf b/dot_config/hypr/executable_hyprland.conf
new file mode 100644
index 0000000..40d43f6
--- /dev/null
+++ b/dot_config/hypr/executable_hyprland.conf
@@ -0,0 +1,151 @@
+monitor=,preferred,auto,1
+
+exec-once=$HOME/.config/hypr/autostart
+exec-once=copyq --start-server
+
+input {
+ kb_layout=
+ kb_variant=ffffff
+ kb_model=
+ kb_options=
+ kb_rules=
+
+ follow_mouse=1
+
+ touchpad {
+ natural_scroll=no
+ }
+}
+
+misc{
+
+}
+
+general {
+ sensitivity=1.0 # for mouse cursor
+ gaps_in=8
+ gaps_out=15
+ border_size=5
+ col.active_border=0xfff5c2e7
+ col.inactive_border=0xff45475a
+ apply_sens_to_raw=0 # whether to apply the sensitivity to raw input (e.g. used by games where you aim using your mouse)
+ col.inactive_border=0xff89dceb
+ col.active_border=0xfff9e2af
+}
+
+decoration {
+ drop_shadow = true
+ shadow_range=100
+ shadow_render_power=5
+ col.shadow= 0x33000000
+ col.shadow_inactive=0x22000000
+ rounding=15
+ blur {
+ enabled=false
+ new_optimizations=true
+ size=1 # minimum 1
+ passes=1 # minimum 1, more passes = more resource intensive.
+ # Your blur "amount" is blur_size * blur_passes, but high blur_size (over around 5-ish) will produce artifacts.
+ # if you want heavy blur, you need to up the blur_passes.
+ # the more passes, the more you can up the blur_size without noticing artifacts.
+ }
+}
+
+animations {
+ enabled=1
+ # bezier=overshot,0.05,0.9,0.1,1.1
+ bezier=overshot,0.13,0.99,0.29,1.1
+ animation=windows,1,4,overshot,slide
+ animation=border,1,10,default
+ animation=fade,1,10,default
+ animation=workspaces,1,6,overshot,slidevert
+}
+
+dwindle {
+ pseudotile=1 # enable pseudotiling on dwindle
+ force_split=0
+}
+
+master{
+
+}
+
+gestures {
+ workspace_swipe=yes
+ workspace_swipe_fingers=4
+}
+
+# example window rules
+# for windows named/classed as abc and xyz
+#windowrule=move 69 420,abc
+windowrule=move center,title:^(fly_is_kitty)$
+windowrule=size 800 500,title:^(fly_is_kitty)$
+windowrule=animation slide,title:^(all_is_kitty)$
+windowrule=float,title:^(all_is_kitty)$
+#windowrule=tile,xy
+windowrule=tile,title:^(kitty)$
+windowrule=float,title:^(fly_is_kitty)$
+windowrule=float,title:^(clock_is_kitty)$
+windowrule=size 418 234,title:^(clock_is_kitty)$
+#windowrule=pseudo,abc
+#windowrule=monitor 0,xyz
+
+# example binds
+bindm=SUPER,mouse:272,movewindow
+bindm=SUPER,mouse:273,resizewindow
+
+bind=SUPER,RETURN,exec,wezterm
+bind=,Print,exec,~/.config/hypr/scripts/screenshot
+bind=SUPER,W,killactive,
+bind=SUPER,M,exit,
+bind=SUPER,E,exec,nautilus
+bind=SUPER,S,togglefloating,
+bind=SUPER,R,exec,wofi --show drun -o DP-3
+bind=SUPER,P,pseudo,
+
+bind=SUPER,Q,exec,~/.config/hypr/scripts/lock
+
+bind=SUPER,left,movefocus,l
+bind=SUPER,right,movefocus,r
+bind=SUPER,up,movefocus,u
+bind=SUPER,down,movefocus,d
+
+# bind=CTRL,1,workspace,1
+# bind=CTRL,2,workspace,2
+# bind=CTRL,3,workspace,3
+# bind=CTRL,4,workspace,4
+# bind=CTRL,5,workspace,5
+# bind=CTRL,6,workspace,6
+bind=SUPER,1,workspace,1
+bind=SUPER,2,workspace,2
+bind=SUPER,3,workspace,3
+bind=SUPER,4,workspace,4
+bind=SUPER,5,workspace,5
+bind=SUPER,6,workspace,6
+bind=SUPER,7,workspace,7
+bind=SUPER,8,workspace,8
+bind=SUPER,9,workspace,9
+bind=SUPER,0,workspace,10
+
+bind=ALT,1,movetoworkspace,1
+bind=ALT,2,movetoworkspace,2
+bind=ALT,3,movetoworkspace,3
+bind=ALT,4,movetoworkspace,4
+bind=ALT,5,movetoworkspace,5
+bind=ALT,6,movetoworkspace,6
+bind=ALT,7,movetoworkspace,7
+bind=ALT,8,movetoworkspace,8
+bind=ALT,9,movetoworkspace,9
+bind=ALT,0,movetoworkspace,10
+
+bind=SUPER,mouse_down,workspace,e+1
+bind=SUPER,mouse_up,workspace,e-1
+
+bind=SUPER,g,togglegroup
+bind=SUPER,tab,changegroupactive
+
+# rec
+bind=CTRL,1,exec,kitty --title fly_is_kitty --hold cava
+bind=CTRL,2,exec,code-insiders
+bind=CTRL,3,exec,kitty --single-instance --hold donut.c
+bind=CTRL,4,exec,kitty --title clock_is_kitty --hold tty-clock -C5
diff --git a/dot_config/hypr/scripts/executable_expand_toolbar b/dot_config/hypr/scripts/executable_expand_toolbar
new file mode 100644
index 0000000..d248300
--- /dev/null
+++ b/dot_config/hypr/scripts/executable_expand_toolbar
@@ -0,0 +1,11 @@
+#!/bin/bash
+
+LOCK=/tmp/expand_toolbar.lock
+
+if [ -f "$LOCK" ]; then
+ echo expand
+ rm -f "$LOCK"
+else
+ echo collapse
+ touch "$LOCK"
+fi
diff --git a/dot_config/hypr/scripts/executable_launch_waybar b/dot_config/hypr/scripts/executable_launch_waybar
new file mode 100644
index 0000000..9f5df48
--- /dev/null
+++ b/dot_config/hypr/scripts/executable_launch_waybar
@@ -0,0 +1,2 @@
+#!/usr/bin/bash
+waybar -c $HOME/.config/hypr/component/waybar/config -s $HOME/.config/hypr/component/waybar/style.css &
\ No newline at end of file
diff --git a/dot_config/hypr/scripts/executable_lock b/dot_config/hypr/scripts/executable_lock
new file mode 100644
index 0000000..3ea725f
--- /dev/null
+++ b/dot_config/hypr/scripts/executable_lock
@@ -0,0 +1,22 @@
+#!/usr/bin/bash
+swaylockd \
+--screenshots \
+--indicator \
+--clock \
+--inside-wrong-color f38ba8 \
+--ring-wrong-color 11111b \
+--inside-clear-color a6e3a1 \
+--ring-clear-color 11111b \
+--inside-ver-color 89b4fa \
+--ring-ver-color 11111b \
+--text-color f5c2e7 \
+--indicator-radius 80 \
+--indicator-thickness 5 \
+--effect-blur 10x7 \
+--effect-vignette 0.2:0.2 \
+--ring-color 11111b \
+--key-hl-color f5c2e7 \
+--line-color 313244 \
+--inside-color 0011111b \
+--separator-color 00000000 \
+--fade-in 0.1 &
\ No newline at end of file
diff --git a/dot_config/hypr/scripts/executable_rgb b/dot_config/hypr/scripts/executable_rgb
new file mode 100644
index 0000000..6f8dbee
Binary files /dev/null and b/dot_config/hypr/scripts/executable_rgb differ
diff --git a/dot_config/hypr/scripts/executable_rgb_borders b/dot_config/hypr/scripts/executable_rgb_borders
new file mode 100644
index 0000000..e555a18
--- /dev/null
+++ b/dot_config/hypr/scripts/executable_rgb_borders
@@ -0,0 +1,37 @@
+#!/usr/bin/python
+
+import subprocess
+import time
+from colour import Color
+
+gradient = [
+ "#ff0000",
+ "#00ff00",
+ "#0000ff",
+]
+
+def color_range(*args):
+ l = []
+ for i,color in enumerate(args):
+ if i == len(args)-1:
+ break
+ l.extend(color.range_to(args[i+1], 25))
+ return l
+
+def rgb_to_hex(r,g,b):
+ return '%02x%02x%02x' % (r,g,b)
+
+def set_color(r,g,b):
+ print(rgb_to_hex(r,g,b))
+ subprocess.run(f"hyprctl keyword dwindle:col.group_border_active 0xff{rgb_to_hex(r,g,b)}".split())
+ subprocess.run(f"hyprctl keyword dwindle:col.group_border 0x66{rgb_to_hex(r,g,b)}".split())
+
+colors = color_range(*[Color(i) for i in gradient])
+
+while 1:
+ for col in colors:
+ set_color(int(col.red*255), int(col.green*255), int(col.blue*255))
+ time.sleep(0.05)
+ for col in colors[::-1]:
+ set_color(int(col.red*255), int(col.green*255), int(col.blue*255))
+ time.sleep(0.05)
\ No newline at end of file
diff --git a/dot_config/hypr/scripts/executable_screenshot b/dot_config/hypr/scripts/executable_screenshot
new file mode 100644
index 0000000..94b4d4f
--- /dev/null
+++ b/dot_config/hypr/scripts/executable_screenshot
@@ -0,0 +1,3 @@
+#!/usr/bin/bash
+
+grim -g "$(slurp)" - | wl-copy
diff --git a/dot_config/hypr/scripts/executable_toolbar_state b/dot_config/hypr/scripts/executable_toolbar_state
new file mode 100644
index 0000000..d1895a3
--- /dev/null
+++ b/dot_config/hypr/scripts/executable_toolbar_state
@@ -0,0 +1,9 @@
+#!/bin/bash
+
+LOCK=/tmp/expand_toolbar.lock
+
+if [ -f "$LOCK" ]; then
+ exit 0
+else
+ exit 1
+fi
diff --git a/dot_config/hypr/scripts/executable_wall b/dot_config/hypr/scripts/executable_wall
new file mode 100644
index 0000000..f2779e7
--- /dev/null
+++ b/dot_config/hypr/scripts/executable_wall
@@ -0,0 +1,4 @@
+#!/usr/bin/bash
+swww init
+swww img $1 --transition-type grow --transition-pos "$(hyprctl cursorpos)" --transition-duration 3
+
diff --git a/dot_config/hypr/scripts/executable_workspaces b/dot_config/hypr/scripts/executable_workspaces
new file mode 100644
index 0000000..a6e3d4b
--- /dev/null
+++ b/dot_config/hypr/scripts/executable_workspaces
@@ -0,0 +1,34 @@
+#!/usr/bin/python
+import subprocess
+import time
+
+def current_workspace():
+ active = subprocess.run("hyprctl activewindow".split(), stdout=subprocess.PIPE).stdout.decode("utf-8").strip()
+ return int(active.split(":")[4].split()[0].strip())
+
+
+def gen_map(e):
+ current = current_workspace()
+ print(f"{current=}")
+ if e < current:
+ return [i for i in range(e+1, current, -1)]
+ elif e > current:
+ return [i for i in range(current,e+1)]
+ else:
+ return [current]
+
+def go_to(e):
+ print(f"change to {e}")
+ _map = gen_map(e)
+ print(f"{_map=}")
+ t = 0.03*len(_map)
+ for i in _map:
+ subprocess.run(f"hyprctl dispatch workspace {i}".split())
+ time.sleep(t)
+ if t != 0.01:
+ t -= 0.03
+ else:
+ t -= 0.02
+
+
+go_to(10)
diff --git a/dot_config/hypr/scripts/tools/executable_dynamic b/dot_config/hypr/scripts/tools/executable_dynamic
new file mode 100644
index 0000000..0fd8f80
--- /dev/null
+++ b/dot_config/hypr/scripts/tools/executable_dynamic
@@ -0,0 +1,83 @@
+#!/usr/bin/python
+
+import subprocess
+from pathlib import Path
+import json
+import pickle
+import time
+import threading
+
+OUT = f"{Path.home()}/.config/hypr/store/dynamic_out.txt"
+# PREV_PATH = f"{Path.home()}/.config/hypr/store/prev.txt"
+prev = None
+
+def print(ar):
+ with open(OUT,"w") as f:
+ f.write(json.dumps(ar))
+
+# with open(f"{Path.home()}/.config/hypr/im_here","w") as f:
+# f.write("")
+
+global PAUSE_MEDIA
+PAUSE_MEDIA = False
+
+def notif_watcher():
+ with open(f"{Path.home()}/.config/hypr/store/latest_notif","rb") as f:
+ new = pickle.load(f)
+ global prev
+ if new != prev:
+ print(json.dumps({"class":"none","text":""}))
+ global PAUSE_MEDIA
+ PAUSE_MEDIA = True
+ urgency = "low"
+ if new["urgency"] == "CRITICAL":
+ urgency = "critical"
+ elif new["urgency"] == "NORMAL":
+ urgency = "normal"
+ doc = {
+ "class":urgency,
+ "text":f'[{new["app_name"]}] {new["summary"]}',
+ "tooltip":"notification"
+ }
+ print(doc)
+ time.sleep(3)
+ print({"class":"none","text":""})
+ PAUSE_MEDIA = False
+ prev = new
+
+
+def start_watcher():
+ while 1:
+ notif_watcher()
+ time.sleep(0.5)
+
+
+def debug():
+ while 1:
+ print(PAUSE_MEDIA)
+ time.sleep(0.5)
+t = threading.Thread(target=start_watcher)
+d = threading.Thread(target=debug)
+t.start()
+# d.start()
+
+
+
+with open("test.log", "wb") as f:
+ process = subprocess.Popen(
+ "waybar-mpris --position --autofocus".split(),
+ stdout=subprocess.PIPE
+ )
+ print(json.dumps({"class":"none","text":""}))
+ for line in iter(lambda: process.stdout.readline().decode("utf-8"), b""):
+ dat = json.loads(line)
+ if not PAUSE_MEDIA:
+ if "text" in dat:
+ dat["text"] = dat["text"].replace(" ", "").replace("", "")
+ print(dat)
+ else:
+ print({"class":"none","text":""})
+
+t.join()
+# d.join()
+
\ No newline at end of file
diff --git a/dot_config/hypr/scripts/tools/executable_expand b/dot_config/hypr/scripts/tools/executable_expand
new file mode 100644
index 0000000..79e3319
--- /dev/null
+++ b/dot_config/hypr/scripts/tools/executable_expand
@@ -0,0 +1,50 @@
+#!/usr/bin/bash
+TEMP=/tmp/current_wall
+
+files=(~/.config/hypr/wallpapers/*)
+
+hypr=~/.config/hypr
+scripts=$hypr/scripts
+
+cooldown=0.1
+
+
+while true
+do
+ case "$1" in
+ "cycle")
+ index=$(cat $TEMP)
+ index=$((index+1))
+ if [ $index -ge ${#files[@]} ]; then
+ index=0
+ fi
+ echo $index > $TEMP
+ $scripts/wall "${files[$index]}"
+ exit 0
+ ;;
+ "arrow-icon")
+ if $scripts/toolbar_state; then
+ echo ""
+ else
+ echo ""
+ fi
+ ;;
+ "ss-icon")
+ if $scripts/toolbar_state; then
+ echo ""
+ else
+ echo ""
+ fi
+ ;;
+ # "media")
+
+ *)
+ if $scripts/toolbar_state; then
+ echo " "
+ else
+ echo ""
+ fi
+ ;;
+ esac
+ sleep $cooldown
+done
\ No newline at end of file
diff --git a/dot_config/hypr/scripts/tools/executable_notif b/dot_config/hypr/scripts/tools/executable_notif
new file mode 100644
index 0000000..352bd42
--- /dev/null
+++ b/dot_config/hypr/scripts/tools/executable_notif
@@ -0,0 +1,22 @@
+#!/usr/bin/python
+import pickle
+import os
+from pathlib import Path
+dat = {
+ "app_name":os.getenv("DUNST_APP_NAME"),
+ "summary":os.getenv("DUNST_SUMMARY"),
+ "body":os.getenv("DUNST_BODY"),
+ "icon":os.getenv("DUNST_ICON_path"),
+ "urgency":os.getenv("DUNST_URGENCY"),
+ "id":os.getenv("DUNST_ID"),
+ "progress":os.getenv("DUNST_PROGRESS"),
+ "category":os.getenv("DUNST_CATEGORY"),
+ "stack_tag":os.getenv("DUNST_STACK_TAG"),
+ "urls":os.getenv("DUNST_URLS"),
+ "timeout":os.getenv("DUNST_TIMEOUT"),
+ "timestamp":os.getenv("DUNST_TIMESTAMP"),
+ "desktop-entry":os.getenv("DUNST_DESKTOP_ENTRY"),
+ "stack-tag":os.getenv("DUNST_STACK_TAG"),
+}
+with open(f"{Path.home()}/.config/hypr/store/latest_notif", "wb") as f:
+ pickle.dump(dat, f)
diff --git a/dot_config/hypr/scripts/tools/executable_start_dyn b/dot_config/hypr/scripts/tools/executable_start_dyn
new file mode 100644
index 0000000..d650bd7
--- /dev/null
+++ b/dot_config/hypr/scripts/tools/executable_start_dyn
@@ -0,0 +1,10 @@
+#!/usr/bin/bash
+
+while true
+do
+ # echo ""
+ out=$(cat ~/.config/hypr/store/dynamic_out.txt)
+ echo "$out" | jq --unbuffered --compact-output
+ # cat ~/.config/hypr/scripts/tools/dynamic_out.txt
+ sleep 0.5
+done
\ No newline at end of file
diff --git a/dot_config/hypr/store/dynamic_out.txt b/dot_config/hypr/store/dynamic_out.txt
new file mode 100644
index 0000000..ec87896
--- /dev/null
+++ b/dot_config/hypr/store/dynamic_out.txt
@@ -0,0 +1 @@
+{"class": "none", "text": ""}
\ No newline at end of file
diff --git a/dot_config/hypr/store/empty_latest_notif b/dot_config/hypr/store/empty_latest_notif
new file mode 100644
index 0000000..e69de29
diff --git a/dot_config/hypr/store/empty_prev.txt b/dot_config/hypr/store/empty_prev.txt
new file mode 100644
index 0000000..e69de29
diff --git a/dot_config/hypr/wallpapers/cloud.png b/dot_config/hypr/wallpapers/cloud.png
new file mode 100644
index 0000000..215bda9
Binary files /dev/null and b/dot_config/hypr/wallpapers/cloud.png differ
diff --git a/dot_config/hypr/wallpapers/clouds_realism.jpg b/dot_config/hypr/wallpapers/clouds_realism.jpg
new file mode 100644
index 0000000..dd7a42a
Binary files /dev/null and b/dot_config/hypr/wallpapers/clouds_realism.jpg differ
diff --git a/dot_config/hypr/wallpapers/evening-sky.png b/dot_config/hypr/wallpapers/evening-sky.png
new file mode 100644
index 0000000..5386ac1
Binary files /dev/null and b/dot_config/hypr/wallpapers/evening-sky.png differ
diff --git a/dot_config/hypr/wallpapers/flower.jpg b/dot_config/hypr/wallpapers/flower.jpg
new file mode 100644
index 0000000..efe702a
Binary files /dev/null and b/dot_config/hypr/wallpapers/flower.jpg differ
diff --git a/dot_config/hypr/wallpapers/mountain.png b/dot_config/hypr/wallpapers/mountain.png
new file mode 100644
index 0000000..2b30b5f
Binary files /dev/null and b/dot_config/hypr/wallpapers/mountain.png differ
diff --git a/dot_config/hypr/wallpapers/totoro.png b/dot_config/hypr/wallpapers/totoro.png
new file mode 100644
index 0000000..e8a4971
Binary files /dev/null and b/dot_config/hypr/wallpapers/totoro.png differ
diff --git a/dot_config/hypr/wallpapers/train.jpg b/dot_config/hypr/wallpapers/train.jpg
new file mode 100644
index 0000000..d9452c6
Binary files /dev/null and b/dot_config/hypr/wallpapers/train.jpg differ
diff --git a/dot_config/packages/archgirlie b/dot_config/packages/archgirlie
index 185d947..1e261b1 100644
--- a/dot_config/packages/archgirlie
+++ b/dot_config/packages/archgirlie
@@ -1,3 +1,4 @@
+[1m[33m -> [0m[0mAvoid running yay as root/sudo.
aic94xx-firmware
alsa-utils
arandr
@@ -22,6 +23,7 @@ catppuccin-gtk-theme-macchiato
catppuccin-latte-grub-theme-git
catppuccin-macchiato-grub-theme-git
catppuccin-mocha-grub-theme-git
+cava
chaotic-keyring
chaotic-mirrorlist
cheat-bin
@@ -58,13 +60,14 @@ glow
goland
goland-jre
gparted
+grim
grub
gum
gvfs-smb
hunspell-en_us
hyfetch
hyphen-en
-hyprland
+hyprland-git
imagemagick
inotify-tools
iptables-nft
@@ -157,6 +160,7 @@ sddm-catppuccin-git
sddm-theme-catppuccin-git
sdl2-gamepad-mapper
shfmt
+slurp
smbclient
starship
steam
@@ -179,8 +183,11 @@ ttf-firacode-nerd
ttf-liberation
ttf-nerd-fonts-symbols
ttfautohint
+tty-clock-git
+tty-clock-git-debug
udisks2
ufw
+ungoogled-chromium-bin
unrar
unzip
upd72020x-fw
@@ -189,6 +196,8 @@ vesktop
vkd3d
volta
vulkan-tools
+waybar
+waybar-mpris-git
wd719x-firmware
wezterm
wget
@@ -200,7 +209,7 @@ wofi
xclip
xdg-desktop-portal
xdg-desktop-portal-gtk
-xdg-desktop-portal-hyprland
+xdg-desktop-portal-hyprland-git
xf86-video-nouveau
xfce4-settings
xorg-server
diff --git a/dot_config/wofi/config b/dot_config/wofi/config
new file mode 100644
index 0000000..07575ea
--- /dev/null
+++ b/dot_config/wofi/config
@@ -0,0 +1,15 @@
+width=400
+height=250
+location=center
+show=drun
+prompt=Search...
+filter_rate=100
+allow_markup=true
+no_actions=true
+halign=fill
+orientation=vertical
+content_halign=fill
+insensitive=true
+allow_images=true
+image_size=40
+gtk_dark=true
diff --git a/dot_config/wofi/menu b/dot_config/wofi/menu
new file mode 100644
index 0000000..a0cf646
--- /dev/null
+++ b/dot_config/wofi/menu
@@ -0,0 +1,16 @@
+# Config for wofi-wifi-menu
+
+# position values:
+# 1 2 3
+# 8 0 4
+# 7 6 5
+POSITION=3
+
+#y-offset
+YOFF=15
+
+#x-offset
+XOFF=-30
+
+#fields to be displayed
+FIELDS=SSID,IN-USE,BARS,SECURITY
diff --git a/dot_config/wofi/menu.css b/dot_config/wofi/menu.css
new file mode 100644
index 0000000..aae4053
--- /dev/null
+++ b/dot_config/wofi/menu.css
@@ -0,0 +1,5 @@
+@import ".config/wofi/style.css";
+window {
+ font-family: "FiraCode Nerd Font Mono";
+ font-size: 13px;
+}
diff --git a/dot_config/wofi/style.css b/dot_config/wofi/style.css
new file mode 100644
index 0000000..18df29d
--- /dev/null
+++ b/dot_config/wofi/style.css
@@ -0,0 +1,70 @@
+window {
+ margin: 0px;
+ border: 5px solid #f5c2e7;
+ background-color: #f5c2e7;
+ border-radius: 15px;
+}
+
+#input {
+ padding: 4px;
+ margin: 4px;
+ padding-left: 20px;
+ border: none;
+ color: #fff;
+ font-weight: bold;
+ background-color: #fff;
+ background: linear-gradient(90deg, rgba(203,166,247,1) 0%, rgba(245,194,231,1) 100%);
+ outline: none;
+ border-radius: 15px;
+ margin: 10px;
+ margin-bottom: 2px;
+}
+#input:focus {
+ border: 0px solid #fff;
+ margin-bottom: 0px;
+}
+
+#inner-box {
+ margin: 4px;
+ border: 10px solid #fff;
+ color: #cba6f7;
+ font-weight: bold;
+ background-color: #fff;
+ border-radius: 15px;
+}
+
+#outer-box {
+ margin: 0px;
+ border: none;
+ border-radius: 15px;
+ background-color: #fff;
+}
+
+#scroll {
+ margin-top: 5px;
+ border: none;
+ border-radius: 15px;
+ margin-bottom: 5px;
+ /* background: rgb(255,255,255); */
+}
+
+#text:selected {
+ color: #fff;
+ margin: 0px 0px;
+ border: none;
+ border-radius: 15px;
+}
+
+#entry {
+ margin: 0px 0px;
+ border: none;
+ border-radius: 15px;
+ background-color: transparent;
+}
+
+#entry:selected {
+ margin: 0px 0px;
+ border: none;
+ border-radius: 15px;
+ background: linear-gradient(45deg, rgba(203,166,247,1) 30%, rgba(245,194,231,1) 100%);
+}