dotfiles/dot_config/polybar/panels/config.ini

;; ┌────────────────────────────────────────────────────────────┐
;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▀▀░█▀█░█▀█░█▀▀░▀█▀░█▀▀│
;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░░░█░█░█░█░█▀▀░░█░░█░█│
;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀▀▀░▀▀▀░▀░▀░▀░░░▀▀▀░▀▀▀│
;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░│
;; └────────────────────────────────────────────────────────────┘

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

;; Global WM Settings

[global/wm]
; Adjust the _NET_WM_STRUT_PARTIAL top value
; Used for top aligned bars
margin-bottom = 0

; Adjust the _NET_WM_STRUT_PARTIAL bottom value
; Used for bottom aligned bars
margin-top = 0

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

;; Bar Settings

[bar/main]
; Use either of the following command to list available outputs:
; If unspecified, the application will pick the first one it finds.
; $ polybar -m | cut -d ':' -f 1
; $ xrandr -q | grep " connected" | cut -d ' ' -f1
monitor =

; Use the specified monitor as a fallback if the main one is not found.
monitor-fallback =

; Require the monitor to be in connected state
; XRandR sometimes reports my monitor as being disconnected (when in use)
monitor-strict = false

; Tell the Window Manager not to configure the window.
; Use this to detach the bar if your WM is locking its size/position.
override-redirect = false

; Put the bar at the bottom of the screen
bottom = false

; Prefer fixed center position for the `modules-center` block
; When false, the center position will be based on the size of the other blocks.
fixed-center = true

; Dimension defined as pixel value (e.g. 35) or percentage (e.g. 50%),
; the percentage can optionally be extended with a pixel offset like so:
; 50%:-10, this will result in a width or height of 50% minus 10 pixels
width = 100%
height = 30

; Offset defined as pixel value (e.g. 35) or percentage (e.g. 50%)
; the percentage can optionally be extended with a pixel offset like so:
; 50%:-10, this will result in an offset in the x or y direction 
; of 50% minus 10 pixels
offset-x = 0
offset-y = 0

; Background ARGB color (e.g. #f00, #ff992a, #ddff1023)
background = ${color.bg}

; Foreground ARGB color (e.g. #f00, #ff992a, #ddff1023)
foreground = ${color.fg}

; Background gradient (vertical steps)
;   background-[0-9]+ = #aarrggbb
;;background-0 = 

; Value used for drawing rounded corners
; Note: This shouldn't be used together with border-size because the border 
; doesn't get rounded
; Individual top/bottom values can be defined using:
;   radius-{top,bottom}
radius-top = 0.0
radius-bottom = 0.0

; Under-/overline pixel size and argb color
; Individual values can be defined using:
;   {overline,underline}-size
;   {overline,underline}-color
;;overline-size = 0
;;overline-color = ${color.ac}

; Values applied to all borders
; Individual side values can be defined using:
;   border-{left,top,right,bottom}-size
;   border-{left,top,right,bottom}-color
; The top and bottom borders are added to the bar height, so the effective
; window height is:
;   height + border-top-size + border-bottom-size
; Meanwhile the effective window width is defined entirely by the width key and
; the border is placed withing this area. So you effectively only have the
; following horizontal space on the bar:
;   width - border-right-size - border-left-size
;;border-size = 2
;;border-color = ${color.ac}

; Number of spaces to add at the beginning/end of the bar
; Individual side values can be defined using:
;   padding-{left,right}
padding = 0

; Number of spaces to add before/after each module
; Individual side values can be defined using:
;   module-margin-{left,right}
module-margin-left = 0
module-margin-right = 0

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

; Fonts are defined using <font-name>;<vertical-offset>
; Font names are specified using a fontconfig pattern.
;   font-0 = NotoSans-Regular:size=8;2
;   font-1 = MaterialIcons:size=10
;   font-2 = Termsynu:size=8;-1
;   font-3 = FontAwesome:size=10
; See the Fonts wiki page for more details

font-0 = "Noto Sans:size=9;3"
font-1 = "Iosevka Nerd Font:size=12;3"
font-2 = "Iosevka Nerd Font:size=16;4"

; Modules are added to one of the available blocks
;   modules-left = cpu ram
;   modules-center = xwindow xbacklight
;   modules-right = ipc clock

modules-left = menu sep2 term web files settings
modules-center = 
modules-right = style sep alsa battery network date sep sysmenu

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

; The separator will be inserted between the output of each module
separator =

; Opacity value between 0.0 and 1.0 used on fade in/out
dim-value = 1.0

; Value to be used to set the WM_NAME atom
; If the value is empty or undefined, the atom value
; will be created from the following template: polybar-[BAR]_[MONITOR]
; NOTE: The placeholders are not available for custom values
wm-name = 

; Locale used to localize various module data (e.g. date)
; Expects a valid libc locale, for example: sv_SE.UTF-8
locale = 

; Position of the system tray window
; If empty or undefined, tray support will be disabled
; NOTE: A center aligned tray will cover center aligned modules
;
; Available positions:
;   left
;   center
;   right
;   none
tray-position = none

; If true, the bar will not shift its
; contents when the tray changes
tray-detached = false

; Tray icon max size
tray-maxsize = 16

; Background color for the tray container 
; ARGB color (e.g. #f00, #ff992a, #ddff1023)
; By default the tray container will use the bar
; background color.
tray-background = ${color.background}

; Tray offset defined as pixel value (e.g. 35) or percentage (e.g. 50%)
tray-offset-x = 0
tray-offset-y = 0

; Pad the sides of each tray icon
tray-padding = 0

; Scale factor for tray clients
tray-scale = 1.0

; Restack the bar window and put it above the
; selected window manager's root
;
; Fixes the issue where the bar is being drawn
; on top of fullscreen window's
;
; Currently supported WM's:
;   bspwm
;   i3 (requires: `override-redirect = true`)
;;wm-restack =

; Set a DPI values used when rendering text
; This only affects scalable fonts
; dpi = 

; Enable support for inter-process messaging
; See the Messaging wiki page for more details.
enable-ipc = true

; Fallback click handlers that will be called if
; there's no matching module handler found.
click-left = 
click-middle = 
click-right =
scroll-up =
scroll-down =
double-click-left =
double-click-middle =
double-click-right =

; Requires polybar to be built with xcursor support (xcb-util-cursor)
; Possible values are:
; - default   : The default pointer as before, can also be an empty string (default)
; - pointer   : Typically in the form of a hand
; - ns-resize : Up and down arrows, can be used to indicate scrolling
cursor-click = 
cursor-scroll = 

;; WM Workspace Specific

; bspwm
;;scroll-up = bspwm-desknext
;;scroll-down = bspwm-deskprev
;;scroll-up = bspc desktop -f prev.local
;;scroll-down = bspc desktop -f next.local

;i3
;;scroll-up = i3wm-wsnext
;;scroll-down = i3wm-wsprev
;;scroll-up = i3-msg workspace next_on_output
;;scroll-down = i3-msg workspace prev_on_output

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

;; Application Settings

[settings]
; The throttle settings lets the eventloop swallow up til X events
; if they happen within Y millisecond after first event was received.
; This is done to prevent flood of update event.
;
; For example if 5 modules emit an update event at the same time, we really
; just care about the last one. But if we wait too long for events to swallow
; the bar would appear sluggish so we continue if timeout
; expires or limit is reached.
throttle-output = 5
throttle-output-for = 10

; Time in milliseconds that the input handler will wait between processing events
;throttle-input-for = 30

; Reload upon receiving XCB_RANDR_SCREEN_CHANGE_NOTIFY events
screenchange-reload = false

; Compositing operators
; @see: https://www.cairographics.org/manual/cairo-cairo-t.html#cairo-operator-t
compositing-background = source
compositing-foreground = over
compositing-overline = over
compositing-underline = over
compositing-border = over

; Define fallback values used by all module formats
;format-foreground = 
;format-background = 
;format-underline =
;format-overline =
;format-spacing =
;format-padding =
;format-margin =
;format-offset =

; Enables pseudo-transparency for the bar
; If set to true the bar can be transparent without a compositor.
pseudo-transparency = false

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

;; ┌────────────────────────────────────────────────────────────┐
;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▀▀░█▀█░█░░░█▀█░█▀▄░█▀▀│
;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░░░█░█░█░░░█░█░█▀▄░▀▀█│
;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀▀▀░▀▀▀░▀▀▀░▀▀▀░▀░▀░▀▀▀│
;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░│
;; └────────────────────────────────────────────────────────────┘
;;
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

[color]

;; Active Colors
bg = #232832
bg-alt = #1C2028
fg = #EAEAEA
fg-alt = #9C9C9C

trans = #00000000
white = #FFFFFF
black = #000000

;; Material Colors

red = #e53935
pink = #d81b60
purple = #8e24aa
deep-purple = #5e35b1
indigo = #3949ab
blue = #1e88e5
light-blue = #039be5
cyan = #00acc1
teal = #00897b
green = #43a047
light-green = #7cb342
lime = #c0ca33
yellow = #fdd835
amber = #ffb300
orange = #fb8c00
deep-orange = #f4511e
brown = #6d4c41
grey = #757575
blue-gray = #546e7a

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

;; ┌────────────────────────────────────────────────────────────────┐
;; │░█▀█░█▀█░█░░░█░█░█▀▄░█▀█░█▀▄░░░░░░░░░█▄█░█▀█░█▀▄░█░█░█░░░█▀▀░█▀▀│
;; │░█▀▀░█░█░█░░░░█░░█▀▄░█▀█░█▀▄░░░░▀░░░░█░█░█░█░█░█░█░█░█░░░█▀▀░▀▀█│
;; │░▀░░░▀▀▀░▀▀▀░░▀░░▀▀░░▀░▀░▀░▀░░░░▀░░░░▀░▀░▀▀▀░▀▀░░▀▀▀░▀▀▀░▀▀▀░▀▀▀│
;; │░Created░By░Aditya░Shakya░@adi1090x░░░░░░░░░░░░░░░░░░░░░░░░░░░░░│
;; └────────────────────────────────────────────────────────────────┘
;;
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

[module/alsa]
type = internal/alsa

; You can find the different card numbers in `/proc/asound/cards`
;;master-soundcard = default
;;speaker-soundcard = default
;;headphone-soundcard = default

; Default: Master
;;master-mixer = Master

; Optionally define speaker and headphone mixers
; Default: none
;;speaker-mixer = Speaker
; Default: none
;;headphone-mixer = Headphone

; Default: 5
;;interval = 5

; Available tags:
;   <label-volume> (default)
;   <ramp-volume>
;   <bar-volume>
format-volume = <ramp-volume>
format-volume-background = ${color.bg-alt}
format-volume-padding = 2

; Available tags:
;   <label-muted> (default)
;   <ramp-volume>
;   <bar-volume>
format-muted = <label-muted>
format-muted-background = ${color.bg-alt}
format-muted-padding = 2

; Available tokens:
;   %percentage% (default)
label-volume = %percentage%%

; Available tokens:
;   %percentage% (default
label-muted = ﱝ
label-muted-foreground = ${color.fg-alt}

ramp-volume-0 = 
ramp-volume-1 = 
ramp-volume-2 = 
ramp-volume-3 = 

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

[module/battery]
type = internal/battery

full-at = 99

; $ ls -1 /sys/class/power_supply/
battery = BAT1
adapter = ACAD

poll-interval = 2
time-format = %H:%M

; Available tags:
;   <label-charging> (default)
;   <bar-capacity>
;   <ramp-capacity>
;   <animation-charging>
format-charging = <animation-charging>
format-charging-background = ${color.bg-alt}
format-charging-padding = 2

; Available tags:
;   <label-discharging> (default)
;   <bar-capacity>
;   <ramp-capacity>
;   <animation-discharging>
format-discharging = <ramp-capacity>
format-discharging-background = ${color.bg-alt}
format-discharging-padding = 2

; Available tags:
;   <label-full> (default)
;   <bar-capacity>
;   <ramp-capacity>
format-full = <label-full>
format-full-background = ${color.bg-alt}
format-full-padding = 2

; Available tokens:
;   %percentage% (default)
;   %time%
;   %consumption% (shows current charge rate in watts)
label-charging = %percentage%%

; Available tokens:
;   %percentage% (default)
;   %time%
;   %consumption% (shows current discharge rate in watts)
label-discharging = %percentage%%

; Available tokens:
;   %percentage% (default)
;label-full = Fully Charged
label-full = 
label-full-foreground = ${color.green} 

ramp-capacity-0 = 
ramp-capacity-1 = 
ramp-capacity-2 = 
ramp-capacity-3 = 
ramp-capacity-4 = 
ramp-capacity-5 = 
ramp-capacity-6 = 
ramp-capacity-7 = 
ramp-capacity-8 = 
ramp-capacity-9 = 

animation-charging-0 = 
animation-charging-1 = 
animation-charging-2 = 
animation-charging-3 = 
animation-charging-4 = 
animation-charging-5 = 
animation-charging-6 = 

; Framerate in milliseconds
animation-charging-framerate = 750

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

[module/date]
type = internal/date

interval = 1.0

time = %I:%M %p
;;time-alt = %B %d, %Y

format = <label>
format-background = ${color.bg-alt}
format-padding = 2

label = %time%

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

[module/network]
type = internal/network

interface = wlan0
interval = 1.0

;ping-interval = 3
;;udspeed-minwidth = 5
accumulate-stats = true
unknown-as-up = true

; Available tags:
;   <label-connected> (default)
;   <ramp-signal>
format-connected = <label-connected>
format-connected-background = ${color.bg-alt}
format-connected-padding = 2

; Available tags:
;   <label-disconnected> (default)
format-disconnected = <label-disconnected>
format-disconnected-background = ${color.bg-alt}
format-disconnected-padding = 2

; Available tags:
;   <label-connected> (default)
;   <label-packetloss>
;   <animation-packetloss>
;;format-packetloss = <animation-packetloss> <label-connected>

; Available tokens:
;   %ifname%    [wireless+wired]
;   %local_ip%  [wireless+wired]
;   %local_ip6% [wireless+wired]
;   %essid%     [wireless]
;   %signal%    [wireless]
;   %upspeed%   [wireless+wired]
;   %downspeed% [wireless+wired]
;   %linkspeed% [wired]
; Default: %ifname% %local_ip%
;label-connected = 說
label-connected = "%{A1:networkmanager_dmenu &:}說%{A}"

; Available tokens:
;   %ifname%    [wireless+wired]
; Default: (none)
;label-disconnected = ﲁ
label-disconnected = "%{A1:networkmanager_dmenu &:}ﲁ%{A}"
label-disconnected-foreground = ${color.fg-alt}

; Available tokens:
;   %ifname%    [wireless+wired]
;   %local_ip%  [wireless+wired]
;   %local_ip6% [wireless+wired]
;   %essid%     [wireless]
;   %signal%    [wireless]
;   %upspeed%   [wireless+wired]
;   %downspeed% [wireless+wired]
;   %linkspeed% [wired]
; Default: (none)
;label-packetloss = %essid%
;label-packetloss-foreground = #eefafafa

ramp-signal-0 = 說
ramp-signal-1 = 說
ramp-signal-2 = 說
ramp-signal-3 = 說
ramp-signal-4 = 說

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

[module/menu]
type = custom/text

content = 
content-background = ${color.light-blue}
content-foreground = ${color.fg}
content-padding = 3

click-left = ~/.config/polybar/panels/scripts/launcher.sh --budgie
click-right = ~/.config/polybar/panels/scripts/launcher.sh --budgie

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

[module/sysmenu]
type = custom/text

content = 襤
content-background = ${color.bg-alt}
content-foreground = ${color.fg}
content-padding = 3

click-left = ~/.config/polybar/panels/scripts/powermenu.sh --budgie
click-right = ~/.config/polybar/panels/scripts/powermenu.sh --budgie

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

[module/style]
type = custom/text
content = פֿ
content-background = ${color.bg-alt}
content-foreground = ${color.fg}
content-padding = 2

click-left = ~/.config/polybar/panels/scripts/style-switch.sh --budgie
click-right = ~/.config/polybar/panels/scripts/style-switch.sh --budgie

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

[module/sep]
type = custom/text

content = |
content-foreground = ${color.grey}
content-background = ${color.bg-alt}
content-padding = 1

[module/sep2]
type = custom/text

content = |
content-foreground = ${color.bg}
content-background = ${color.bg}
content-padding = 1

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
;; Apps
 
[module/term]
type = custom/text

content = "%{T3}%{T-}"
content-foreground = ${color.green}
content-background = ${color.bg}
content-padding = 3

click-left  = termite &

[module/web]
type = custom/text

content = "%{T3}%{T-}"
content-foreground = ${color.orange}
content-background = ${color.bg}
content-padding = 3

click-left  = firefox &

[module/files]
type = custom/text

content = "%{T3}%{T-}"
content-foreground = ${color.blue}
content-background = ${color.bg}
content-padding = 3

click-left  = thunar &

[module/settings]
type = custom/text

content = "%{T3}煉%{T-}"
content-foreground = ${color.red}
content-background = ${color.bg}
content-padding = 3

click-left  = xfce4-settings &

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_