#!/usr/bin/env bash
# @file ~/.local/bin/setup-firewall
# @brief Setup and enable the firewall
# @description
#   This script sets up and configures the firewall. On Linux systems, it prefers `firewall-cmd` and, if that is not available,
#   it uses `ufw`. By default, it allows outgoing traffic and denies incoming traffic.
#
#   ## CloudFlare
#
#   The script will allow incoming traffic on port 80 and 443 from any CloudFlare IP address. The logic was adapted from
#   [cloudflare-ufw](https://github.com/Paul-Reed/cloudflare-ufw).

if command -v firewall-cmd > /dev/null; then
    echo "firewall-cmd detected - preferring this over UFW"
elif command -v ufw > /dev/null; then
    ### Deny incoming and allow outgoing
    sudo ufw default deny incoming
    sudo ufw default allow outgoing
    
    ### Allow CloudFlare IPs to connect to port 80 and 443
    ### May be useful if cloudflared is not being used
    # for CF_IP in `curl -sw '\n' https://www.cloudflare.com/ips-v{4,6}`; do
    #     sudo ufw allow proto tcp from "$CF_IP" to any port 80,443 comment 'CloudFlare IP'
    # done

    ### Enable / reload the firewall
    sudo ufw enable
    sudo ufw reload
fi