install.fairie/home/private_dot_ssh/endlessh/config.tmpl

# The port on which to listen for new SSH connections.
Port {{ .host.ssh.endlesshPort }}

# The endless banner is sent one line at a time. This is the delay
# in milliseconds between individual lines.
Delay 10000

# The length of each line is randomized. This controls the maximum
# length of each line. Shorter lines may keep clients on for longer if
# they give up after a certain number of bytes.
MaxLineLength 32

# Maximum number of connections to accept at a time. Connections beyond
# this are not immediately rejected, but will wait in the queue.
MaxClients 1000

# Set the detail level for the log.
#   0 = Quiet
#   1 = Standard, useful log messages
#   2 = Very noisy debugging information
LogLevel 1

# Set the family of the listening socket
#   0 = Use IPv4 Mapped IPv6 (Both v4 and v6, default)
#   4 = Use IPv4 only
#   6 = Use IPv6 only
BindFamily 0