438 lines
22 KiB
Bash
438 lines
22 KiB
Bash
#!/usr/bin/env bash
|
|
# @file Quick Start
|
|
# @brief Main entry point for Install Doctor that ensures Homebrew and a few dependencies are installed before cloning the repository and running Chezmoi.
|
|
# @description
|
|
# This script ensures Homebrew is installed and then installs a few dependencies that Install Doctor relies on.
|
|
# After setting up the minimal amount of changes required, it clones the Install Doctor repository (which you
|
|
# can customize the location of so you can use your own fork). It then proceeds by handing things over to
|
|
# Chezmoi which handles the dotfile application and synchronous scripts. Task is used in conjunction with
|
|
# Chezmoi to boost the performance in some spots by introducing asynchronous features.
|
|
#
|
|
# **Note**: `https://install.doctor/start` points to this file.
|
|
#
|
|
# ## Dependencies
|
|
#
|
|
# The chart below shows the dependencies we rely on to get Install Doctor going. The dependencies that are bolded
|
|
# are mandatory. The ones that are not bolded are conditionally installed only if they are required.
|
|
#
|
|
# | Dependency | Description |
|
|
# |--------------------|--------------------------------------------------------------------------------------|
|
|
# | **Chezmoi** | Dotfile configuration manager (on-device provisioning) |
|
|
# | **Task** | Task runner used on-device for task parallelization and dependency management |
|
|
# | **ZX / Node.js** | ZX is a Node.js abstraction that allows for better scripts |
|
|
# | Gum | Gum is a terminal UI prompt CLI (which allows sweet, interactive prompts) |
|
|
# | Glow | Glow is a markdown renderer used for applying terminal-friendly styled to markdown |
|
|
#
|
|
# There are also a handful of system packages that are installed like `curl` and `git`. Then, during the Chezmoi provisioning
|
|
# process, there are a handful of system packages that are installed to ensure things run smoothly. You can find more details
|
|
# about these extra system packages by browsing through the `home/.chezmoiscripts/${DISTRO_ID}/` folder and other applicable
|
|
# folders (e.g. `universal`).
|
|
#
|
|
# Although Install Doctor comes with presets that install a whole gigantic amount of software, it can actually
|
|
# be quite good at provisioning minimal server environments where you want to keep the binaries to a minimum.
|
|
#
|
|
# ## Variables
|
|
#
|
|
# Specify certain environment variables to customize the behavior of Install Doctor. With the right combination of
|
|
# environment variables, this script can be run completely headlessly. This allows us to do things like test our
|
|
# provisioning script on a wide variety of operating systems.
|
|
#
|
|
# | Variable | Description |
|
|
# |------------------------|-----------------------------------------------------------------------------------|
|
|
# | `START_REPO` (or `REPO`) | Variable to specify the Git fork to use when provisioning |
|
|
# | `ANSIBLE_PROVISION_VM` | **For Qubes**, determines the name of the VM used to provision the system |
|
|
# | `DEBUG_MODE` | Set to true to enable verbose logging |
|
|
#
|
|
# For a full list of variables you can use to customize Install Doctor, check out our [Customization](https://install.doctor/docs/customization)
|
|
# and [Secrets](https://install.doctor/docs/customization/secrets) documentation.
|
|
#
|
|
# ## Links
|
|
#
|
|
# [Install Doctor homepage](https://install.doctor)
|
|
# [Install Doctor documentation portal](https://install.doctor/docs) (includes tips, tricks, and guides on how to customize the system to your liking)
|
|
|
|
# @description Ensure Ubuntu / Debian run in `noninteractive` mode
|
|
export DEBIAN_FRONTEND=noninteractive
|
|
|
|
# @description Load default settings if it is in a CI setting
|
|
if [ -n "$CI" ]; then
|
|
export HOST="$HOST"
|
|
export NO_RESTART=true
|
|
export HEADLESS_INSTALL=true
|
|
export SOFTWARE_GROUP="Full"
|
|
export FULL_NAME="Brian Zalewski"
|
|
export PRIMARY_EMAIL="help@megabyte.space"
|
|
export PUBLIC_SERVICES_DOMAIN="lab.megabyte.space"
|
|
export RESTRICTED_ENVIRONMENT=false
|
|
export WORK_ENVIRONMENT=false
|
|
fi
|
|
|
|
# @description Disconnect from WARP, if connected
|
|
if command -v warp-cli > /dev/null; then
|
|
if warp-cli status | grep 'Connected' > /dev/null; then
|
|
warp-cli disconnect && echo "Disconnected WARP to prevent conflicts"
|
|
fi
|
|
fi
|
|
|
|
# @description Detect `START_REPO` format and determine appropriate git address, otherwise use the master Install Doctor branch
|
|
if [ -z "$START_REPO" ]; then
|
|
START_REPO="https://github.com/megabyte-labs/install.doctor.git"
|
|
else
|
|
if [[ "$START_REPO" == *"/"* ]]; then
|
|
# Either full git address or GitHubUser/RepoName
|
|
if [[ "$START_REPO" == *":"* ]] || [[ "$START_REPO" == *"//"* ]]; then
|
|
START_REPO="$START_REPO"
|
|
else
|
|
START_REPO="https://github.com/${START_REPO}.git"
|
|
fi
|
|
else
|
|
START_REPO="https://github.com/$START_REPO/install.doctor.git"
|
|
fi
|
|
fi
|
|
|
|
# @description Logs with style using Gum if it is installed, otherwise it uses `echo`. It also leverages Glow to render markdown.
|
|
# When Glow is not installed, it uses `cat`.
|
|
# @example logger info "An informative log"
|
|
logg() {
|
|
TYPE="$1"
|
|
MSG="$2"
|
|
if [ "$TYPE" == 'error' ]; then
|
|
if command -v gum > /dev/null; then
|
|
gum style --border="thick" "$(gum style --foreground="#ff0000" "✖") $(gum style --bold --background="#ff0000" --foreground="#ffffff" " ERROR ") $(gum style --bold "$MSG")"
|
|
else
|
|
echo "ERROR: $MSG"
|
|
fi
|
|
elif [ "$TYPE" == 'info' ]; then
|
|
if command -v gum > /dev/null; then
|
|
gum style " $(gum style --foreground="#00ffff" "○") $(gum style --faint --foreground="#ffffff" "$MSG")"
|
|
else
|
|
echo "INFO: $MSG"
|
|
fi
|
|
elif [ "$TYPE" == 'md' ]; then
|
|
if command -v glow > /dev/null; then
|
|
glow "$MSG"
|
|
else
|
|
cat "$MSG"
|
|
fi
|
|
elif [ "$TYPE" == 'prompt' ]; then
|
|
if command -v gum > /dev/null; then
|
|
gum style " $(gum style --foreground="#00008b" "▶") $(gum style --bold "$MSG")"
|
|
else
|
|
echo "PROMPT: $MSG"
|
|
fi
|
|
elif [ "$TYPE" == 'star' ]; then
|
|
if command -v gum > /dev/null; then
|
|
gum style " $(gum style --foreground="#d1d100" "◆") $(gum style --bold "$MSG")"
|
|
else
|
|
echo "STAR: $MSG"
|
|
fi
|
|
elif [ "$TYPE" == 'start' ]; then
|
|
if command -v gum > /dev/null; then
|
|
gum style " $(gum style --foreground="#00ff00" "▶") $(gum style --bold "$MSG")"
|
|
else
|
|
echo "START: $MSG"
|
|
fi
|
|
elif [ "$TYPE" == 'success' ]; then
|
|
if command -v gum > /dev/null; then
|
|
gum style "$(gum style --foreground="#00ff00" "✔") $(gum style --bold "$MSG")"
|
|
else
|
|
echo "SUCCESS: $MSG"
|
|
fi
|
|
elif [ "$TYPE" == 'warn' ]; then
|
|
if command -v gum > /dev/null; then
|
|
gum style " $(gum style --foreground="#d1d100" "◆") $(gum style --bold --background="#ffff00" --foreground="#000000" " WARNING ") $(gum style --bold "$MSG")"
|
|
else
|
|
echo "WARNING: $MSG"
|
|
fi
|
|
else
|
|
if command -v gum > /dev/null; then
|
|
gum style " $(gum style --foreground="#00ff00" "▶") $(gum style --bold "$TYPE")"
|
|
else
|
|
echo "$MSG"
|
|
fi
|
|
fi
|
|
}
|
|
|
|
# @description Notify user that they can press CTRL+C to prevent /etc/sudoers from being modified (which is currently required for headless installs on some systems)
|
|
sudo -n true || SUDO_EXIT_CODE=$?
|
|
logg info 'Your user will temporarily be granted passwordless sudo for the duration of the script'
|
|
if [ -n "$SUDO_EXIT_CODE" ]; then
|
|
logg info 'Press CTRL+C to bypass this prompt to either enter your password when needed or perform a non-privileged installation'
|
|
logg info 'Note: Non-privileged installations are not yet supported'
|
|
fi
|
|
|
|
# @description Add current user to /etc/sudoers so that headless automation is possible
|
|
if ! sudo cat /etc/sudoers | grep '# TEMPORARY FOR INSTALL DOCTOR' > /dev/null; then
|
|
if [ -n "$SUDO_PASSWORD" ]; then
|
|
printf '%s\n' "$SUDO_PASSWORD" | sudo -p "" -S echo "$(whoami) ALL=(ALL:ALL) NOPASSWD: ALL # TEMPORARY FOR INSTALL DOCTOR" | sudo tee -a /etc/sudoers
|
|
else
|
|
echo "$(whoami) ALL=(ALL:ALL) NOPASSWD: ALL # TEMPORARY FOR INSTALL DOCTOR" | sudo tee -a /etc/sudoers
|
|
fi
|
|
fi
|
|
|
|
# @section Qubes dom0 Bootstrap
|
|
# @description Perform Qubes dom0 specific logic like updating system packages, setting up the Tor VM, updating TemplateVMs, and
|
|
# beginning the provisioning process using Ansible and an AppVM used to handle the provisioning process
|
|
if command -v qubesctl > /dev/null; then
|
|
# @description Ensure sys-whonix is configured (for Qubes dom0)
|
|
CONFIG_WIZARD_COUNT=0
|
|
function configureWizard() {
|
|
if xwininfo -root -tree | grep "Anon Connection Wizard"; then
|
|
WINDOW_ID="$(xwininfo -root -tree | grep "Anon Connection Wizard" | sed 's/^ *\([^ ]*\) .*/\1/')"
|
|
xdotool windowactivate "$WINDOW_ID" && sleep 1 && xdotool key 'Enter' && sleep 1 && xdotool key 'Tab Tab Enter' && sleep 24 && xdotool windowactivate "$WINDOW_ID" && sleep 1 && xdotool key 'Enter' && sleep 300
|
|
qvm-shutdown --wait sys-whonix
|
|
sleep 3
|
|
qvm-start sys-whonix
|
|
if xwininfo -root -tree | grep "systemcheck | Whonix" > /dev/null; then
|
|
WINDOW_ID_SYS_CHECK="$(xwininfo -root -tree | grep "systemcheck | Whonix" | sed 's/^ *\([^ ]*\) .*/\1/')"
|
|
if xdotool windowactivate "$WINDOW_ID_SYS_CHECK"; then
|
|
sleep 1
|
|
xdotool key 'Enter'
|
|
fi
|
|
fi
|
|
else
|
|
sleep 3
|
|
CONFIG_WIZARD_COUNT=$((CONFIG_WIZARD_COUNT + 1))
|
|
if [[ "$CONFIG_WIZARD_COUNT" == '4' ]]; then
|
|
echo "The sys-whonix anon-connection-wizard utility did not open."
|
|
else
|
|
echo "Checking for anon-connection-wizard again.."
|
|
configureWizard
|
|
fi
|
|
fi
|
|
}
|
|
|
|
# @description Ensure dom0 is updated
|
|
if [ ! -f /root/dom0-updated ]; then
|
|
sudo qubesctl --show-output state.sls update.qubes-dom0
|
|
sudo qubes-dom0-update --clean -y
|
|
touch /root/dom0-updated
|
|
fi
|
|
|
|
# @description Ensure sys-whonix is running
|
|
if ! qvm-check --running sys-whonix; then
|
|
qvm-start sys-whonix --skip-if-running
|
|
configureWizard > /dev/null
|
|
fi
|
|
|
|
# @description Ensure TemplateVMs are updated
|
|
if [ ! -f /root/templatevms-updated ]; then
|
|
# timeout of 10 minutes is added here because the whonix-gw VM does not like to get updated
|
|
# with this method. Anyone know how to fix this?
|
|
sudo timeout 600 qubesctl --show-output --skip-dom0 --templates state.sls update.qubes-vm &> /dev/null || true
|
|
while read -r RESTART_VM; do
|
|
qvm-shutdown --wait "$RESTART_VM"
|
|
done< <(qvm-ls --all --no-spinner --fields=name,state | grep Running | grep -v sys-net | grep -v sys-firewall | grep -v sys-whonix | grep -v dom0 | awk '{print $1}')
|
|
sudo touch /root/templatevms-updated
|
|
fi
|
|
|
|
# @description Ensure provisioning VM can run commands on any VM
|
|
echo "/bin/bash" | sudo tee /etc/qubes-rpc/qubes.VMShell
|
|
sudo chmod 755 /etc/qubes-rpc/qubes.VMShell
|
|
echo "${ANSIBLE_PROVISION_VM:=provision}"' dom0 allow' | sudo tee /etc/qubes-rpc/policy/qubes.VMShell
|
|
echo "$ANSIBLE_PROVISION_VM"' $anyvm allow' | sudo tee -a /etc/qubes-rpc/policy/qubes.VMShell
|
|
sudo chown "$(whoami):$(whoami)" /etc/qubes-rpc/policy/qubes.VMShell
|
|
sudo chmod 644 /etc/qubes-rpc/policy/qubes.VMShell
|
|
|
|
|
|
# @description Create provisioning VM and initialize the provisioning process from there
|
|
qvm-create --label red --template debian-11 "$ANSIBLE_PROVISION_VM" &> /dev/null || true
|
|
qvm-volume extend "$ANSIBLE_PROVISION_VM:private" "40G"
|
|
if [ -f ~/.vaultpass ]; then
|
|
qvm-run "$ANSIBLE_PROVISION_VM" 'rm -f ~/QubesIncoming/dom0/.vaultpass'
|
|
qvm-copy-to-vm "$ANSIBLE_PROVISION_VM" ~/.vaultpass
|
|
qvm-run "$ANSIBLE_PROVISION_VM" 'cp ~/QubesIncoming/dom0/.vaultpass ~/.vaultpass'
|
|
fi
|
|
|
|
# @description Restart the provisioning process with the same script but from the provisioning VM
|
|
qvm-run --pass-io "$ANSIBLE_PROVISION_VM" 'curl -sSL https://install.doctor/start > ~/start.sh && bash ~/start.sh'
|
|
exit 0
|
|
fi
|
|
|
|
# @description Ensure basic system packages are available on the device
|
|
if ! command -v curl > /dev/null || ! command -v git > /dev/null || ! command -v expect > /dev/null || ! command -v rsync > /dev/null; then
|
|
if command -v apt-get > /dev/null; then
|
|
# @description Ensure `build-essential`, `curl`, `expect`, `git`, `rsync`, `procps`, and `file` are installed on Debian / Ubuntu
|
|
sudo apt-get update
|
|
sudo apt-get install -y build-essential curl expect git rsync procps file
|
|
elif command -v dnf > /dev/null; then
|
|
# @description Ensure `curl`, `expect`, `git`, `rsync`, `procps-ng`, and `file` are installed on Fedora (as well as the Development Tools package)
|
|
sudo dnf groupinstall -y 'Development Tools'
|
|
sudo dnf install -y curl expect git rsync procps-ng file
|
|
elif command -v yum > /dev/null; then
|
|
# @description Ensure `curl`, `expect`, `git`, `rsync`, `procps-ng`, and `file` are installed on CentOS (as well as the Development Tools package)
|
|
sudo yum groupinstall -y 'Development Tools'
|
|
sudo yum install -y curl expect git rsync procps-ng file
|
|
elif command -v pacman > /dev/null; then
|
|
# @description Ensure `base-devel`, `curl`, `expect`, `git`, `rsync`, `procps-ng`, and `file` are installed on Archlinux
|
|
sudo pacman update
|
|
sudo pacman -Syu base-devel curl expect git rsync procps-ng file
|
|
elif command -v zypper > /dev/null; then
|
|
# @description Ensure `curl`, `expect`, `git`, `rsync`, `procps`, and `file` are installed on OpenSUSE (as well as the devel_basis pattern)
|
|
sudo zypper install -yt pattern devel_basis
|
|
sudo zypper install -y curl expect git rsync procps file
|
|
elif command -v apk > /dev/null; then
|
|
# @description Ensure `curl`, `expect`, `git`, `rsync`, `procps`, and `file` are installed on Alpine
|
|
apk add build-base curl expect git rsync procps file
|
|
elif [ -d /Applications ] && [ -d /Library ]; then
|
|
# @description Ensure CLI developer tools are available on macOS (via `xcode-select`)
|
|
sudo xcode-select -p >/dev/null 2>&1 || xcode-select --install
|
|
elif [[ "$OSTYPE" == 'cygwin' ]] || [[ "$OSTYPE" == 'msys' ]] || [[ "$OSTYPE" == 'win32' ]]; then
|
|
# @description Ensure `curl`, `expect`, `git`, and `rsync` are installed on Windows
|
|
choco install -y curl expect git rsync
|
|
fi
|
|
fi
|
|
|
|
# @description Ensure Homebrew is installed and available
|
|
if ! command -v brew > /dev/null; then
|
|
if [ -d /home/linuxbrew/.linuxbrew/bin ]; then
|
|
eval $(/home/linuxbrew/.linuxbrew/bin/brew shellenv)
|
|
if ! command -v brew > /dev/null; then
|
|
echo "The /home/linuxbrew/.linuxbrew directory exists but something is not right. Try removing it and running the script again." && exit 1
|
|
fi
|
|
else
|
|
# @description Installs Homebrew and addresses a couple potential issues
|
|
if command -v sudo > /dev/null && sudo -n true; then
|
|
echo | /bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)"
|
|
else
|
|
echo "Homebrew is not installed. The script will attempt to install Homebrew and you might be prompted for your password."
|
|
/bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)" || BREW_EXIT_CODE="$?"
|
|
if [ -n "$BREW_EXIT_CODE" ]; then
|
|
if command -v brew > /dev/null; then
|
|
echo "Homebrew was installed but part of the installation failed. Trying a few things to fix the installation.."
|
|
BREW_DIRS="share/man share/doc share/zsh/site-functions etc/bash_completion.d"
|
|
for BREW_DIR in $BREW_DIRS; do
|
|
if [ -d "$(brew --prefix)/$BREW_DIR" ]; then
|
|
sudo chown -R "$(whoami)" "$(brew --prefix)/$BREW_DIR"
|
|
fi
|
|
done
|
|
brew update --force --quiet
|
|
fi
|
|
fi
|
|
fi
|
|
|
|
# @description Ensures the `brew` binary is available on Linux machines. macOS installs `brew` into the default `PATH`
|
|
# so nothing needs to be done for macOS.
|
|
if [ -d /home/linuxbrew/.linuxbrew/bin ]; then
|
|
eval $(/home/linuxbrew/.linuxbrew/bin/brew shellenv)
|
|
elif [ -f /opt/homebrew/bin/brew ]; then
|
|
eval "$(/opt/homebrew/bin/brew shellenv)"
|
|
fi
|
|
fi
|
|
fi
|
|
|
|
# @description Ensure Chezmoi is installed
|
|
if ! command -v chezmoi > /dev/null; then
|
|
brew install chezmoi
|
|
fi
|
|
|
|
# @description Ensure Node.js is installed
|
|
if ! command -v node > /dev/null; then
|
|
brew install node
|
|
fi
|
|
|
|
# @description Ensure ZX is installed
|
|
if ! command -v zx > /dev/null; then
|
|
brew install zx
|
|
fi
|
|
|
|
# @description Install Glow / Gum if the `HEADLESS_INSTALL` variable is not set to true
|
|
if [ "$HEADLESS_INSTALL" != 'true' ]; then
|
|
# @description Ensure Gum is installed
|
|
if ! command -v gum > /dev/null; then
|
|
brew install gum
|
|
fi
|
|
|
|
# @description Ensure Glow is installed
|
|
if ! command -v glow > /dev/null; then
|
|
brew install glow
|
|
fi
|
|
fi
|
|
|
|
# @description Ensure the ${XDG_DATA_HOME:-$HOME/.local/share}/chezmoi directory is cloned and up-to-date
|
|
logg info 'Setting git http.postBuffer value high for large source repository'
|
|
git config --global http.postBuffer 524288000
|
|
if [ -d "${XDG_DATA_HOME:-$HOME/.local/share}/chezmoi/.git" ]; then
|
|
cd "${XDG_DATA_HOME:-$HOME/.local/share}/chezmoi"
|
|
logg info "Pulling the latest changes from ${START_REPO:-https://github.com/megabyte-labs/install.doctor.git}"
|
|
git pull origin master
|
|
else
|
|
logg info "Cloning ${START_REPO} to ${XDG_DATA_HOME:-$HOME/.local/share}/chezmoi"
|
|
git clone ${START_REPO} "${XDG_DATA_HOME:-$HOME/.local/share}/chezmoi"
|
|
fi
|
|
|
|
# @description If the `${XDG_CONFIG_HOME:-$HOME/.config}/chezmoi/chezmoi.yaml` file is missing, then guide the user through the initial setup
|
|
if [ ! -f "${XDG_CONFIG_HOME:-$HOME/.config}/chezmoi/chezmoi.yaml" ]; then
|
|
# @description Show introduction message if Glow is installed
|
|
if command -v glow > /dev/null; then
|
|
glow "${XDG_DATA_HOME:-$HOME/.local/share}/chezmoi/docs/terminal/chezmoi-intro.md"
|
|
fi
|
|
|
|
# @description Prompt for the software group if the `SOFTWARE_GROUP` variable is not defined
|
|
if command -v gum > /dev/null; then
|
|
if [ -z "$SOFTWARE_GROUP" ]; then
|
|
logg prompt 'Select the software group you would like to install. If your environment is a macOS, Windows, or environment with the DISPLAY environment variable then desktop software will be installed too. The software groups are in the '"${XDG_CONFIG_HOME:-$HOME/.config}/chezmoi/chezmoi.yaml"' file.'
|
|
SOFTWARE_GROUP="$(gum choose "Basic" "Standard" "Full")"
|
|
export SOFTWARE_GROUP
|
|
fi
|
|
else
|
|
logg error 'Woops! Gum needs to be installed for the guided installation. Try running brew install gum' && exit 1
|
|
fi
|
|
|
|
# @description Run `chezmoi init` when the Chezmoi configuration is missing
|
|
logg info 'Running chezmoi init since the '"${XDG_CONFIG_HOME:-$HOME/.config}/chezmoi/chezmoi.yaml"' is not present'
|
|
chezmoi init
|
|
fi
|
|
|
|
# @description Run `chezmoi apply` and enable verbose mode if the `DEBUG_MODE` environment variable is set to true
|
|
if [ "$DEBUG_MODE" = 'true' ]; then
|
|
DEBUG_MODIFIER="-vvvvv"
|
|
fi
|
|
|
|
# @description Save the log of the provision process to `$HOME/.local/var/log/install.doctor/install.doctor.$(date +%s).log` and add the Chezmoi
|
|
# `--force` flag if the `HEADLESS_INSTALL` variable is set to true.
|
|
mkdir -p "$HOME/.local/var/log/install.doctor"
|
|
LOG_FILE="$HOME/.local/var/log/install.doctor/install.doctor.$(date +%s).log"
|
|
if [ "$HEADLESS_INSTALL" = 'true' ]; then
|
|
logg info 'Running chezmoi apply forcefully'
|
|
if command -v unbuffer > /dev/null; then
|
|
unbuffer -p chezmoi apply $DEBUG_MODIFIER -k --force 2>&1 | tee "$LOG_FILE"
|
|
# logg info 'Running chezmoi second time' && unbuffer -p chezmoi apply $DEBUG_MODIFIER -k --force 2>&1 | tee "$LOG_FILE"
|
|
else
|
|
chezmoi apply $DEBUG_MODIFIER -k --force 2>&1 | tee "$LOG_FILE"
|
|
# logg info 'Running chezmoi second time' && chezmoi apply $DEBUG_MODIFIER -k --force 2>&1 | tee "$LOG_FILE"
|
|
fi
|
|
else
|
|
logg info 'Running chezmoi apply'
|
|
if command -v unbuffer > /dev/null; then
|
|
unbuffer -p chezmoi apply $DEBUG_MODIFIER -k 2>&1 | tee "$LOG_FILE"
|
|
# logg info 'Running chezmoi second time' && unbuffer -p chezmoi apply $DEBUG_MODIFIER -k 2>&1 | tee "$LOG_FILE"
|
|
else
|
|
chezmoi apply $DEBUG_MODIFIER -k 2>&1 | tee "$LOG_FILE"
|
|
# logg info 'Running chezmoi second time' && chezmoi apply $DEBUG_MODIFIER -k 2>&1 | tee "$LOG_FILE"
|
|
fi
|
|
fi
|
|
|
|
# @description Ensure gsed is available on macOS (for modifying `/etc/sudoers` to remove passwordless sudo)
|
|
if [ -d /Applications ] && [ -d /System ]; then
|
|
if ! command -v gsed > /dev/null; then
|
|
if command -v brew > /dev/null; then
|
|
brew install gsed
|
|
else
|
|
logg warn 'Homebrew is not available and passwordless sudo might still be enabled in /etc/sudoers. Modify the file manually if you wish to disable passwordless sudo.'
|
|
fi
|
|
fi
|
|
fi
|
|
|
|
# @description Ensure temporary passwordless sudo privileges are removed from `/etc/sudoers`
|
|
if command -v gsed > /dev/null; then
|
|
sudo gsed -i '/# TEMPORARY FOR INSTALL DOCTOR/d' /etc/sudoers || logg warn 'Failed to remove passwordless sudo from the /etc/sudoers file'
|
|
else
|
|
sudo sed -i '/# TEMPORARY FOR INSTALL DOCTOR/d' /etc/sudoers || logg warn 'Failed to remove passwordless sudo from the /etc/sudoers file'
|
|
fi
|
|
|
|
# @description Render the `docs/terminal/post-install.md` file to the terminal at the end of the provisioning process
|
|
logg success 'Provisioning complete!'
|
|
if command -v glow > /dev/null && [ -f "${XDG_DATA_HOME:-$HOME/.local/share}/chezmoi/docs/terminal/post-install.md" ]; then
|
|
glow "${XDG_DATA_HOME:-$HOME/.local/share}/chezmoi/docs/terminal/post-install.md"
|
|
fi
|